At The Back Of The Pack
Arm chair racerAt the back of the pack
I have an extra rear caliper for an 85 X but I believe that it is missing a pc. Is there some sort of sleeve that should go on this bolt or is it a totally different bolt like the other side?? Are these slides still available?? Where is the best place to get a kit to rebuild this cylinder?? I am thinking fix it up for resale....Thanks
86 350X
86 200X (son's)
86 250sx (daughter's)
84 70/125lifan
68 SS Chevelle
72 4X4 Chevy Truck
Click to see what I do
At The Back Of The Pack
Arm chair racerFirst time rider
Its missing the rubber boot that goes through the hole and the pin slides in it.
Power User
Roostin Away
what happened to the pin that sticks out of the back of the piston that activates the e brake. the brake fluid will leak out with out it.
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Big bores are cool
Arm chair racerJust too addicted
The bolt that your pointing to goes in the hole behind it.The pin(see pic)that dads was talking about goes there.I have a new boot for that but can't find it right now.Also,where that allen head big pin is,there is a rubber boot that goes there also(see pic).I have both boots and e-brake parts if your interested.I think sandpuppie was looking for a caliper,might want to get a hold of him.
85/86 ATC 567x
Bailey(11/30/97-4/17/06) My little angel
Reply With Quote