110 not running, carb question

[Murph]

one of my 110's hasn't been running for awhile, and I noticed a wierd noise coming from the carb when I try to start it. It sounds like a little suction cup type noise. I noticed at the back of the carb, where the airhose connects, theres a puddle of gas jus laying there. So I watched that while I pulled the starter, and noticed little bubbles of gas was coming out of one of the 2 little holes at the back. It's coming out of the smaller one, closest to the frame. Does anyone know what could be causing this? Or how to fix it. Also, would something like this cause the bike to not run? I will probably take the carb apart and clean it up really good, should I get a carb rebuild kit as well?

[crackshot]

Just rebuild it. Be sure to blow out all the passages with compressed air.

[Murph]

Well, i got the carb all cleaned out and fixed that problem, but the bike still doesn't run...

[danteross77]

Not sure if this will help, but I had a 110 once that just died one day and Long story short one of the small screws on the choke flap came off and worked it way down the intake and the intake valve was stuck open. The carb acted like what you descibed when I pulled the cord.

[team-red-rider]

i have a 110 i replaced the pulse generator now when i try to start it it just back fires i cant figure it out whats wrong habe ne ideas