Page 1 of 2 1 2 LastLast
Results 1 to 15 of 17

Thread: im looking at 84200s on ebay...

  1. #1
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275

    im looking at 84200s on ebay...

    anybody recommend these machines,looks like front suspension but no rear..pull start only too...the 1 on ebay is located in grantville pa,like 1 1/2 hrs away from me.looks to be a pretty clean machine.id like something my niece and nephew could put around on when the come over..any input ???

  2. #2
    Join Date
    Jan 2005
    Location
    RI
    --
    2,530
    i grew up on one since i was 6. I still have it, restored it over last winter, and will never sell it. I ride my 350x and 250r, but there are times when ill pull it out and have more fun on it then riding the others. They are great machines, and extremely simple to fix anything wrong with it.

    Make sure your niece and nephew are careful on it...what ages are they? The unsuspended models are more prone to throw a rear wheel in the air when taking a corner, but you can get used to it pretty easily. Make sure you watch them close before you let them go on it.

    Id say grab it up...do you have a link so we can scope it out and say our share on it?

    Hope this helps,
    Mike
    1986 Tri-z
    1985 250r
    1985 200s
    1985 70[/SIZE]

  3. #3
    Join Date
    Dec 2004
    Location
    Baltimore, MD
    --
    6,088
    ddw, The 185s and 200s are deceptively fast machines. speeds over 50 are not uncommon. Those kinds of speed and hardtail suspension can be a recipe for fun, or disaster, depending on the experience of the rider. I would say pick up a nice 110, slower and cheaper too. I wouldn't let unexperienced riders on a 185\200. Just my opinion.

  4. #4
    Join Date
    Jul 2005
    Location
    Pennsylvannia
    --
    1,147
    They are awesome machines. Hardtails are very fun machines!! I'd get it for them. And not to mention they are rock solid and reliable.

    And where do you live? I'm about an hour from Grant, PA.
    '85 250SX - My first ever trike and my pride and joy
    **Check Out The Whole SX Project Here!!**
    '85 350X - 10:1 Piston, performance cam, '86 engline/carb
    '85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
    '85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-

  5. #5
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275
    i live in frederick,md....my nephew and niece are 12..theyve been putting around on a atc 70 for years,but i sold it,got a atc 90 off ebay[which was described as restored..more like destroyed.that thing looked nice but had all types of problems]so i sold it after awhile..for $150 more than i paid!! hey..the guy offered,what was i supposed to do...how do you do the post the link thing,i cant seem to do it.....i'll keep trying,so disregard any failed attempts!

  6. #6
    Join Date
    Jan 2005
    Location
    RI
    --
    2,530
    1986 Tri-z
    1985 250r
    1985 200s
    1985 70[/SIZE]

  7. #7
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275

  8. #8
    1985 200s is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2003
    Location
    Olean, NY
    --
    335
    Be carefull he has some recent negative feed back. Looks to be a little smoke and mirrors there.

  9. #9
    danteross77's Avatar
    danteross77 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Dec 2005
    Location
    Texas
    --
    339
    That looks like the exact year and model of my first trike. I had a blast and no problems, of course it was brand new back then, but I loved the hard tail aspect of it, I was a very light kid, about 130 or so back then and I loves the way you could hit a small jump really fast and lean back a little and it would land perfect for my weight, later my dad bought me a 250 sx and I didn't have enough weight to control it propoerly a little scary, I eventually grew into it and I still have it, but I will alway remember the 200s and mudholes and jumps and hills. Great little machine.

  10. #10
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275
    i emailed him and asked for a list of stuff that needed attention or repaired,explaining to him that i understand how old it is and expect to do some repairs.i also mentioned to him ive had a rash of dishonest ebayers lately[not all of themthough] saying stuff like "runs great or starts on 1-2 pulls,and the classic"put gas in and have fun"..none to be true,only to find out after threating with horrible feedback the true problems with the machines..people must get these thing running and shut them off as soon as you show up to get them!..everything usually gets worked out in the end though.i actually never left bad feedback for people,its ashame you have to threaten it to get the truth about something they describe as a excellent machine...this guy hasnt sent me anything back yet,i emailed him yesterday....

  11. #11
    Join Date
    Sep 2003
    Location
    Elizabethtown PA
    --
    1,581
    if you have trouble making it up here to get in in a timely manner i could pick it up for you and stash it at my garage i rent. just letting you know incase you win it and stuff comes up. i live 20 minutes away from this guy.
    JASON LISKEY

    1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
    2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
    86 trx 250r --- with after market chromoly frame and everything else done to it
    01 400ex --- with 86 trx 250r motor
    87 250x + 93 300ex both 350x powered
    2 = 86 atc 350x's
    86 atc 250r
    83 atc 185s --- from retired guy not ridden since 87
    Bandito framed 110 with 85 motor and yellow us90 fenders + tank

  12. #12
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275
    wow..thanks for the offer,thats decent of you to offer that..i still havent heard anything from him yet...he doesnt seem to communicate alot?i'll see what happens during the time left,i'll keep you posted

  13. #13
    Join Date
    Sep 2003
    Location
    Elizabethtown PA
    --
    1,581
    let me know whats up when you win it.

    i rent a garage i Hershey PA only 15 minutes from where the atc's at. you could stop by and check out my trikes and quads and hang out for awhile.
    JASON LISKEY

    1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
    2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
    86 trx 250r --- with after market chromoly frame and everything else done to it
    01 400ex --- with 86 trx 250r motor
    87 250x + 93 300ex both 350x powered
    2 = 86 atc 350x's
    86 atc 250r
    83 atc 185s --- from retired guy not ridden since 87
    Bandito framed 110 with 85 motor and yellow us90 fenders + tank

  14. #14
    Join Date
    Feb 2006
    Location
    north of buffalo
    --
    557
    I have an 84 200s, nice machine. I've got a soft spot for the old hardtails. Mine is pretty quick and pretty light too, easy to load without ramps, my BR on the other hand is not easy to load.
    Runners:
    84 200s
    05 rancher
    12 rancher

  15. #15
    Ddw350's Avatar
    Ddw350 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2003
    --
    275
    ive found another 200s like 35 mins from me! the other guy hasnt returned any messages or emails ,hmmmm...this guy has messaged me twice with info on the machine,i'll get the link...

//ArrowChat Integreation Code //