Family pictures!, and need help Identifying a engine

**nouseforaname90** · 03-23-2006, 09:59 PM

I personally think $900 is a very price for a Z.
And I've told you before that I like the pics, but I'll tell you again. Nice collection!

**82300R** · 03-23-2006, 10:42 PM

that looks like a 185 motor. tell me this , if the motor was upright( like it was in the frame) right above the spark plug and behind the compression realease lever on the head , is that a bolt that goes into the head? if it is i'm running mine with out one.(oh shot). if it is do you know why its there. by the way mine is a 1980 atc 185.

**nouseforaname90** · 03-23-2006, 10:59 PM

Is it toward the edge of the head? Is there a bolt on the other side that matches it? If I am right, I think you are talking about the bolts that hold your head onto the bottom end. But I'm not sure if thats what you mean..

**82300R** · 03-23-2006, 11:18 PM

Originally Posted by nouseforaname90

Is it toward the edge of the head? Is there a bolt on the other side that matches it? If I am right, I think you are talking about the bolts that hold your head onto the bottom end. But I'm not sure if thats what you mean..

if you look in the first pic on the head there are three fins, at the bottom of the fins in between the first two is the bolt i'm talking about. on my 185 it is a tapped hole with no bolt in it . i looked at some pic's of a 185s head in an old mag and there was no hole that i saw. i just thought thats how a 1980 was. i wonder the purpose of this hole?

**85hondaatc125m** · 03-23-2006, 11:20 PM

That is a nice Family you got there, I see you even have the twins together in 2 pictures there, they are so cute, I would post a pic of my family, but they dont get along. You know how it is, the quad is jealous of the trike because the trike has 1 less tire.

**Howdy** · 03-24-2006, 12:22 AM

Originally Posted by Kintore

DISCLAIMER- There is ALOT of pics on here, I mean alot.

Well here they are, got all of em ready to go.

The non headlight one, is missing the airbox tube(lonesome) and a water pump seal and gear(have em have to install). Then its ready to finish to break in. Then The one with the polished rims is the new Z

And then theres mine!

Here are the pics, Dial Up I worn you lol

And heres the motor im talking about? will this clutch and stuff fit into my atc200?
And PS, I decided to save 3WW from all thew pics, so I had to register a 2nd photobucket account

The motor you have is a 200cc motor. It is either a 82-83 200e motor. How can I tell this from the pictures? In the 1st picture of the motor you can see the case where the electric starter fits. This narrows it down to either a 200e, 200es, 200m, or 84 TRX200 motor. Then in the second picture you can see the front sprocket for the chain drive. You can also see the the gear and shaft for the sub tranny. Being as the 200es and 84 TRX200 was shaft drive those are eliminated. The 200m's had chain drive but no sub tranny, so the 200m is ruled out. This leaves only the 82-83 200e motors as the only possibility. The vin number on the plate beside the shift shaft will confirm the year, model, ect.

But at any rate the clutched and such are the same, and will work in your 200.

Nice pictures by the way. I can't wait for TF!!!
Howdy

**Dammit!** · 03-24-2006, 12:39 AM

You need a bumble bee in that collection. I want one too. Not that I have any use for one but that isn't the point.

**350x'inNY** · 03-24-2006, 12:49 AM

Kintore...

Sweet Josh! Looks like you got a nice old barn there too! This summer we need to do some riding! (Maybe over Easter even????)

Here's a "family" pics I took last fall.... this was prior to striping the green paint off the BR some more and picking up the US90. Someday I might get the Yamaha's going and do their own photo shoot! hahhaa

Bruce

**pomona51** · 03-24-2006, 02:39 AM

Looks like a lot of nice Z's. Also looks like a great place to ride.

**Russell 350X** · 03-24-2006, 09:23 AM

Nice collection of Z's ya got there. Awsomeness.........

**thefox** · 03-24-2006, 10:43 AM

Originally Posted by 82300R

that looks like a 185 motor. tell me this , if the motor was upright( like it was in the frame) right above the spark plug and behind the compression realease lever on the head , is that a bolt that goes into the head? if it is i'm running mine with out one.(oh shot). if it is do you know why its there. by the way mine is a 1980 atc 185.

That hole is for the compression release mount for trikes that have the automatic compression release tied into the pull starter.

**Yamaha Tri-Moto** · 03-24-2006, 03:43 PM

Z's kick ass , very nice rides man

**Kintore** · 03-24-2006, 04:34 PM

Thanks for all the comments guys. Had one and within a few months I got 3 lol

Originally Posted by Dammit!

You need a bumble bee in that collection. I want one too. Not that I have any use for one but that isn't the point.

No way, im all 86. Maybe if I find a good deal.

Originally Posted by Howdy

But at any rate the clutched and such are the same, and will work in your 200.

Nice pictures by the way. I can't wait for TF!!!
Howdy

Thanks alot howdy, thats what I was looking for. Now to get it apart and now screw it!

Originally Posted by 350x'inNY

Kintore...

Sweet Josh! Looks like you got a nice old barn there too! This summer we need to do some riding! (Maybe over Easter even????)

Bruce

Im in for that, but whos going to drive what way? lol

**BigGreenMachine** · 03-24-2006, 04:58 PM

The new Z looks very nice. What mods? Have a look inside to see if its been ported/bored?

James

**Kintore** · 03-24-2006, 05:09 PM

No I havent yet, Guy said stock porting. It has a pipe and reed cage, and a uni. And a fresher top end than my 20 year old one lol

I cant wait to send my clyinder off to Halls performance for porting, and a and hone and all that, with a new top end she will scream!!

Thread: Family pictures!, and need help Identifying a engine

Thread Tools