another tri-z brought back from the dead.here i go again. questions about fork rakes.

**Mosh** · 03-25-2006, 12:08 PM

well i am gonna build another tri-z. this one is gonna take some time and money. i plan on building one sick tri-z this time.no expense spared.i have some questions. the 85 and 86 z had a fork (rake)change between those years. i guess the 86 forks were swept back a half degree. i have a complete 86 front end,forks tripples etc.will these go on a 85 frame? or was the rake change in the neck of the frames? what i need to know is,can i put the 86 front end on a 85 frame with no problems? i have most of the stuff i need. but i do need a few parts yet. does anyone know where i can get a milltech plus 2 swingarm? or even a nice stock plus 2 swingarm?here is a list of what i need. all these parts must be in nice condition.
plus 2 swinger
a nice carb
a nice fuel tank with shield and brackets
a good un ported jug with some bores left 85 0r 86 does not matter.
and a nice stock head
please pm me if you have any of these parts with prices.
this z will be awesome.i dont even think i am gonna take it on the trail. i plan on doing some major engine work to this one. basically i have all the parts to do another z but what i mentioned above.thanks guys

**mike from long island** · 03-25-2006, 05:27 PM

why not go with a +4 axle?? i happen to have one on ebay right now lol

**03 ORANGE SHEE** · 03-25-2006, 11:38 PM

the 86 forks bolt right up to a 85, i have them on mine..
mike has some other high dollar plastic on there as well

**mike from long island** · 03-26-2006, 03:48 PM

Originally Posted by 03 ORANGE SHEE

the 86 forks bolt right up to a 85, i have them on mine..
mike has some other high dollar plastic on there as well

if you list them-they will bid!!!

Thread: another tri-z brought back from the dead.here i go again. questions about fork rakes.

Thread Tools

another tri-z brought back from the dead.here i go again. questions about fork rakes.