New to the board
Arm chair racerNew to the board
I need a little advice on how to remove the waterpump seal on my 85 Z. Should I heat it up some or just try to tap it out with a punch or socket? I don't want to use the smash and hack technique. The clutch cover is off by the way. Thanks for your responses.
Last edited by fattri-z; 04-13-2006 at 12:04 PM.
1985 Yamaha YTZ 250
1988 Kawasaki KX 125
1995 Yamaha V Max 600
Registered User
Roostin Away
To get mine out I used a bar just smaller than the insid of the water pump seal. put it in and just levered it out. Came out pretty easy.
Will
85 Tri-Z "Rumble Bee"
85 250R "Red Rocket"
83 200X "Flat Tracker"
Loves Corn.
Catch me if you can
put a little oil on the seal and case when installing helps it slide in insted of marring up the rubber from installing.
New to the board
Arm chair racerNew to the board
It didn't want to even budge at first but worked its way out eventually. Thanks for the tips.
1985 Yamaha YTZ 250
1988 Kawasaki KX 125
1995 Yamaha V Max 600
Loves Corn.
Catch me if you can
they can be a little tricky sometimes from the heat that they go through glad everything worked out!
Reply With Quote