User On Patrol.
The day begins with 3WW
Instead of posting pictures of nice trikes, lets see who at one time had the worst RUSTED trike.
I'm a very good canidate and I did buy this 85 SX as a none fixer upper, just for parts, if it has any good ones left........... it's just too far gone to fix
Last edited by Huffa; 04-14-2006 at 06:00 AM.
Even team-red-rider is cooler then me.
Arm chair racerJust too addicted
That YTM225DX I sold you was the worst I've ever had, and even that wasn't that bad. Hey by the way do you have your bumblebee 225 put together? Post some pics!!!
-Mike
Registered User
Just too addicted
This here is a rusty trike that I bought from a guy named Rusty. Rusty was playing with a rusty lighter, and Rustys dad lost his garage. So, Rusty sold me this RUSTY trike.
Used to be a YTM200
User On Patrol.
The day begins with 3WW
Those are great pictures dude! I doubt anyone will top that.Originally Posted by Muddy200x
This here is a rusty trike that I bought from a guy named Rusty. Rusty was playing with a rusty lighter, and Rustys dad lost his garage. So, Rusty sold me this RUSTY trike.
Used to be a YTM200
Hey, if you still have it I'd love if you would take a nice shot of it setting in nice green grass (got green grass yet?) so it shows up good.
I don't know why but I'd like a nice glossy of it hanging in my garage, just strikes me as being really funny
If you feel like it and do it, let me know, I'll send you my email address.
Just noticed, the rear rack is certainly salvageable yet isn't it ? You going to sell that part? Hmmmm, the pipe looks just fine too. I need a pipe (whole assembly) for sure. Is it A-OK?
Ooops, its a 200 not a 225, don't think either would fit?
Last edited by Huffa; 04-14-2006 at 02:06 PM.
At The Back Of The Pack
Arm chair racerFirst time rider
isnt much to the ytm after the meltables are gone. but yeah the rack, floor boards and hitch certainly look usable.
-1983 Yamaha YTM200K chain drive -3rd owner! -UNI dry foam performance filter /w wet outterwear -RM 125 2" rise steel handle bars in black powder now - bent from a rolloverCustom 2" round LED tail light /w stainless steel trim in aluminum mount Custom polished aluminum diamond plate rear fender brace with Stainless steel hardwareStainless steel Torx mudflap bolts Custom ONAN vtwin muffler TOUGH sound
-1986 kx80- S O L D
Registered User
Just too addicted
It's been long gone for quite a while now. I did salvage the rack, floorboards, hitch and pipe before it went to the scrap yard. I was told that it was in mint condition before the fire. Damn shame to see a trike go out that way.
Death by Cremation
Power User
Roostin Away
Omg the engine has melted.
2000 Rm250
1985 IT200
2003 suzuki sv1000s
2008 polaris outlaw 525s
Power User
The day begins with 3WW
Yep Aluminum Melts at 1400 Degree's that was a pretty hot fire
1985 Tri-Z-
Power User
Roostin Away
i just got a 1980 atc185 at a equipment auctions for $10 that has been sitting in someones back yard that long that the rear tires are dry rot cracked that bad that they have big holes in them you can put your arm threw.. the tubes are flat also. the seat has no covr with just a 1/2 of foam left.
it pulles over but dont have spark. has good compression. i dont have any pictures though
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Reply With Quote
