New to the board
Arm chair racerNew to the board
just putting my atc back together and it will start first pull only with throttle wide open. i removed air cleaner and it runs alot better but the only way it idles is to remove the air adjustment screw. with that out it runs great, with good throttle response. PLEASE HELP.
Twinkle Toes
The day begins with 3WW
Have you adjusted the idle screw?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
New to the board
Arm chair racerNew to the board
yes , the idle screw doesn't change anything, one thing i forgot to mention is that part of the carb is off a 125. the slide and the upper body,I think i'll put my old slide back on and see if there is any change..
New to the board
Arm chair racerNew to the board
Ok, I changed some things around on the carb. I switched body of the carb with another 125, I used another bowl bacause the petcock was leaking and I noticed the top cap where the cable goes in turned to freely so i replaced it with another one. all is well in my world..... still don't really know what was wrong but it works now so, lets ride###############
oh yeah by the way, in case you didn't know jhatten is
Reply With Quote