I have the jug off the 85 getting bored . How can I check the relief on the exhaust bridge when i get it back. I have calipers but not a bore mic. Any help is appreciated.
First Time Rider
Arm chair racerNew to the board
I have the jug off the 85 getting bored . How can I check the relief on the exhaust bridge when i get it back. I have calipers but not a bore mic. Any help is appreciated.
Power User
Roostin Away
If you put a nice straight edge from top to bottom of the bore along the exhaust bridge, you can slide a feeler guage under It to check to see If It Is relieved enough.
83 ATC 60-R Cr60 converted with Zinger parts.
83 ATC 70.
83 Tri zinger
ATC 85-R Cr85 engine on shortened 86-R frame.
ATC450AF
86 310-R Drag racer
440 snowmobile powered custom built.
87 Cr 500 Converted to Drag racer
First Time Rider
Arm chair racerNew to the board
That's what I thought about doing. But was just a little curious if there was another method of doing it. Thanks!
Reply With Quote