ytm trouble

[topoortorideon4]

my grandpa has a ytm 125 and i just put gas in it and i took off the air box cover and it was full of gas and a couple minutes later i realized it was peeing ou gas from the carb does anyone know what could be wrong? I think it wouldnt start because it is fludded

[Yamahauler]

Either your float is stuck, or your needle and seat are worn out.
Start by taking off the carb and cleaning it real well.
Put the float and needle on and hold it up so the needle plugs the seat. Then blow in where the gas line goes on, if air leaks through, your needle and seat are likely worn.

[topoortorideon4]

the oil pump dont work so we premix the gas and oil and on the bottem of the carb there is a hole where a small line connects and it i leaking out on there im not sure if its an overflow or what but ill thry what you said

[Unclediezel]

How long has it been sitting?????-----Those carbs are VERY tempermental little creatures -so Dissassemble and clean it up before you go any further.

If you need a blow-up Diagram , I can find something for you, or go to one of the Parts sites.