I need to know if rear rims off a 1983 200x will fit on 1986 200x?? Anybody know for sure. Also, feel free to tell me if you know what other machines they will fit on. Thanks in advance for any help you might have on this subject.
At The Back Of The Pack
Arm chair racerAt the back of the pack
I need to know if rear rims off a 1983 200x will fit on 1986 200x?? Anybody know for sure. Also, feel free to tell me if you know what other machines they will fit on. Thanks in advance for any help you might have on this subject.
Putting Priorities in Order, Busier than ever.
Catch me if you can
Stock 83 200x rims are 4 /110mm bolt pattern. In stock form they bolt right on the 83-85 200x and the 83-84 250r.Originally Posted by girlsride2
Howdy
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks Howdy. Shouldn't you be sleeping? haha. Hey I just noticed it says first time rider next to my avatar. too true
BTY what are you telling me? That they won't fit the 1986?
Putting Priorities in Order, Busier than ever.
Catch me if you can
Without modifying them, They will only fit the 86 200x's if you use the 83-85 200x or 83-84 250r hubs.Thanks Howdy. Shouldn't you be sleeping? haha. Hey I just noticed it says first time rider next to my avatar. too true
BTY what are you telling me? That they won't fit the 1986?
Sleep? I got my 4 1/2 hrs of sleep in already. Now I am waiting for the kids to get home so I can take them to the shop with me.
Howdy
Power User
Teaching quads a lesson
I thought most honda's including the sport model atc's used the same bolt pattern.
HEY! I don't really like your attitude right now!
Arm chair racerJust too addicted
I'm not sure what year they are, but I bought my 86R with 200x wheels on it.
Official Wellsville soil tester! With pics and a $3000 medical bill to prove it...
1986 TRX250R
ESR 310~trail ported w/ torque exhaust flange~36mm Keihin carb~v-Force3 reeds~Pro Circuit Exhaust~custom 16oz flywheel weight~2006 YFZ front shocks~adjustable rear dogbone~fully functional rear brake light~Durablue +4 axle
Former Ride 1986 ATC250R
Power User
Roostin Away
when you run 83-85 wheels on anything alse but 83-84 r's you have to put them on backwards.
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Got The Holeshot
Arm chair racerJust too addicted
The bolt pattern is the same on the 83-85 200x and the 86-87 200x. The 83-85 200x is a 8" wheel. The 86-87 200x uses a 9" wheel like the 350X. The hub for a 9" wheel is just a tiny bit too big to go in the 8" wheel. When I tried it, it looked like you could grind a bout 1/8th inch off of the end of each of the four ends of the hub and then it would work.
ATCnut
82 185s - sold
83 200x (hopped up)
84 200x (stock)
84 70 (lost this one to the DMV)
85 70 (soon to have lights, a foot brake, and CDI ignition)
84 200es (parts trike) - sold
85 350X (the best)
85 350X (siezed motor, dream of a poweroll kit someday)
85 250sx (frame was trash, got parted out)
86 250sx (the tractor)
86 250sx (a nicer tractor)
86 250sx (an even nicer tractor)
87 200x (parts trike, its really rough, a dog was chewing on it for a while)
87 250es Big Red (the tank!!)
Power User
Teaching quads a lesson
Here is a nice chart to find out the bolt patterns for most hondas. Its very helpful to keep around.
86-87 Tecate ROCK!
Ride fast...........brake late............and Slide the rear!
Reply With Quote
