I have an 86 R that is mainly stock other than its bored 10 over, has a UNI air filter and an old school answer silencer that i just repacked. I just set the carb to the stock settings. The clip is in the 3rd position on the needle and the air screw is at 2 1/4 turns. I couldnt do much with the float, im not even sure what to do with that, but are my settings good, its running pretty friggin good, the clip was in the 2nd groove and i dont know why, someone was in there trailprotrailpro me i guess and i had the air screw a 2 turns. With the small mods i have are my settings good? it seems to be running sweet but i want it to run perfect.

Justin