Results 1 to 2 of 2

Thread: 200ES carb problems

  1. 06-26-2006, 11:23 PM #1
    85ytz250n
    85ytz250n is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2006
    Location
    Waynesboro, MS
    --
    338

    Question 200ES carb problems

    Does anyone know whether there is akit available to rebuild the carb on a 200ES ? The plastic on the one I have now is real brittle and I know when i take the floats out to clean it they are going to disentagrate. Anyone have the manual for the 200ES? IF you do send me a pm or email me at aholefireman@yahoo.com. Also any of you guys that have replaced the rear bearings on a 200es, are there any tips/tricks to keep in mind? My left case is leaking oil around the shaft so i ordered a new seal for it to, are there any tips or tricks when putting in a new oilseal? I am going to put in a grease zerk in the front while I change bearings in it, any other suggestions besides the BFH?

    Barry
    Last edited by 85ytz250n; 06-27-2006 at 12:16 AM. Reason: forgot some questions.
    There are no stupid questions, but there are alot of stupid people out there that ask questions.

    None of us are capable of screwing things up as bad as a group of us.

    "NON SIBI, SED OMNIBUS"
    Reply With Quote Reply With Quote
  2. 06-27-2006, 08:34 PM #2
    85ytz250n
    85ytz250n is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2006
    Location
    Waynesboro, MS
    --
    338
    I know some one on here knows the answer to my question. Share the knowledge.

    Barry
    There are no stupid questions, but there are alot of stupid people out there that ask questions.

    None of us are capable of screwing things up as bad as a group of us.

    "NON SIBI, SED OMNIBUS"
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //