First Time Rider
Arm chair racerNew to the board
Thoughts On A...750 Blaster
Well i put an add in the local paper for a blaster or something faster and a girl calls me saying shes got a 750 street bike motor in a blaster frame..She claims it is MINT and she wants 500$ for it....What do you guys think..should i buy this and risk it being a half ass hicks dream or should i save the extra 500$ and buy the real thing?
thanks
HELLONWHEELS
Aficionado of white surprise sauces.
Arm chair racerRoostin Away
Hell, it might be woth that just for the sheer parts factor, assuming the motor and suspension is good. I would check for booger welds on the frame....that's a lot of arse to put in a blaster frame and it hold up. I'd at least check it out........take your digital camera!!!!!!!!!!!!!!!!!!!!
1986 Honda ATC 200 S
Some quads and a S x S
-------------
Supporter of Uncle Rico's football camp. Since 1982.
If you are reading this in English, thank a U.S. Military VET. ΜΟΛΩΝ ΛΑΒΕ
First Time Rider
Arm chair racerNew to the board
yah im planning on going to see it in a few days
HELLONWHEELS
First Time Rider
Arm chair racerNew to the board
Any one else got anything to add..Any main things i should look out for/ask?
HELLONWHEELS
Power User
Teaching quads a lesson
For that price, I would look to make sure the engine isn't actually a cardboard cut-out.Originally Posted by HELLONWHEELS
I'm back in the USSR...
First Time Rider
Arm chair racerNew to the board
Well heres what i know now the frame has been chopped and welded big time but looks extremely well, i cant hear it run and i need to get a gas tank and aparetnly alter it to make it fit?????Any who, do you think i should buy it just to say i did and see what becomes of it or should i buy the real deal
HELLONWHEELS
Just Too Addicted
Arm chair racerJust too addicted
if it looks good and dont need a whole lot then i say go ahed and do it. also id make the brakes work. blasters brakes are pretty bad.
The purveyor of "Plan B"
Teaching quads a lesson
i think yamaha needs to redo the blaster with a 300cc fourstroke engine simular to the yfz450. All the manufacturers need to figure out what they're doing for a midsized quad.
"Yes its broken, but does that really surprise you?."
"What happened? What does it look like happened?!?!"
At The Back Of The Pack
Arm chair racerAt the back of the pack
I think the best blaster idea I have heard of is one with the YZF250 engine.
ATCless at the moment...
1977 Firebird Formula
1997 Suzuki RM250
Check my feedback before buying from me
Catch me if you can
any pics yet?
Power User
Teaching quads a lesson
500 for it. you might just be buying someone elses headaches. but if you do get it and dont like it you could probably triple the amount you bought it for by parting it out peice by peice.
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
Just Too Addicted
Just too addicted
did you end up buying it???? pics
Power User
The day begins with 3WW
a 750 on a blaster frame????
those bikes are small to begin with, then they went cuttin the frame up?
Be careful man.
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Power User
Roostin Away
im going to be building a blaster with an 05 yz 250 engine...im going to be extending the swinger 6 inches and extending the A arms a wee bit to compensate.... i think it will be pretty fun... im going to make it look like it came that way from the factory...... also going to get a moose lighting coil for it so i will be able to have head lights and ride it at night... also throwing on a hudro brake kit... and upgradeing the headlight to the new set up that the neweer blasters have...... i think it will perform pretty dam well with an 95 YZ 250 engine... also she is getting a full pipe and port job along with an after market set of reeds and reed cage... ill keep yah posted.. when i start the project this winter... im still getting the pieces i need to start... the project...
Power User
The day begins with 3WW
Wow Brian its been forever since you've posted here.
I think a TRI-Z or 84/85 Tecate motor in a Blaster chassis would be pretty slick. Pass on that 750 Blaster if it needs any work at all. I'd have to hear it run and drive it before I buy it.
Reply With Quote
