Formerly "aaakowalski"
Arm chair racerJust too addicted
I have a 350x with a bit of a spark issue. It had spark when I remove the plug but when I put it in, it seems to loose it. I replaced the coil,cdi voltage regulator, source coil and lighting coils. After i replaced each part, it seems to run for awhile and then it just quits. I have been trying to solve this problem for 2 months or more and am out of ideas.I also tried bypassing the on/off switch with no avail. Does anybody have any ideas?
1985 Ytm 225 dr (Black and gold)
1984 Kxt 250 A1 Tecate
1981 KLT200a1
1983 Yt 175
1985 Atc 350x
1983 Klt 200 C
1985Ytz250 Tri z
Got The Holeshot
Arm chair racerJust too addicted
Double check all your ground connections----The spark wont jump a gap unless it has a good ground to jump to. ----Are you using the correct plug?
Buy American! Unless your only option is a HARLEY.
A customer walked in to my shop and Impatiently stated "My car doesnt start, Whats the problem?"I responded with a smile-"Yep that sounds like your problem alright"----
Just Too Addicted
Arm chair racerJust too addicted
give it to me lol
sorry don't know im not there check ground?
sounds like you have replaced everything !! make sure all wires are connected right - check the cap
touch the frame when running or kicking see if it is back feeding
Reply With Quote