Just Too Addicted
Arm chair racerJust too addicted
Put new rings in, fixed the pullstart (new throw outs, dogs) still doesn't recoil, only ever now and then the spring is good though. I got a carb rebuild.
Pulled it with the truck, wouldn't stay running, throttled it and it bogged down.
Has a new plug and it's gapped right. .060in /.20 mm
I'm stumped. what could it be?
Kindergarden Speller
4 Wheels? Huh?
my rebuilt recoil is doing the samething.
down to parts because i no longer have a place to ride trikes.
GIT IT RAAAGGGGG !!!!
Just Too Addicted
Arm chair racerJust too addicted
check the fuel line
the pilot jet
air screw
filter
i dont know what did ya do to it??????
Got The Holeshot
Arm chair racerJust too addicted
Thats not coorect gapping, LOL. it is supose to be .024-.028 in. What plug are you running (need plug number). Did you rewined the coil spring????Originally Posted by Aka_am
Just Too Addicted
Arm chair racerJust too addicted
My manuel says .060.. Um a Champion, becuase autozone didn't have any ngk's..and I didn't pay for it so. I'll look in a second. It's not getting any spark when I pull start it. I held it so I know it's not a weak spark.
EDIT: Ra6hc for the plug
Last edited by Aka_am; 08-17-2006 at 10:07 PM.
Got The Holeshot
Arm chair racerJust too addicted
it would never run on a gap that big. Need someone elses in put on this. I am positive it would never run on a gap this big. thats the right plug. do you usally ware glasses?? LOL
Power User
Got the holeshot
spark plug gap .6-.7 MM.....024 - .028 inches....
1986 Tri-z
1985 250r
1985 200s
1985 70[/SIZE]
Just Too Addicted
Arm chair racerJust too addicted
I guess i got it backwards.. And yes i do wear glasses, what's that susposed to mean? It still has no spark though, and before i put the new stuff in I did have it running even though it was tough to start.
Power User
Got the holeshot
You said you just put rings in it. Did you get the air gap right on the pulse generator, hook up all the electrical connections, set the valves and timing chain right when the motor was put back in? Lots to check out.
Travis
36 yo, Apple geek, married with kids, conservative. If you are a GUN OWNER and not a member of the NRA, SHAME ON YOU! JOIN!
Gun control is not about guns, it's about CONTROL!
My Rags
85 ATC70,85 ATC70,85 ATC110,83 ATC185S,85 ATC250ES,02 400EX,04 Polaris ATP 500
Past rags:2000 Scrambler 400, 86 350X, 86 250R, 84 200S, 97 ATK260LQ
Got The Holeshot
Arm chair racerJust too addicted
LOL thats what i for got to do when i put mine to gether last month, and it wouldn't run, and i had it back words becuase it has two ways it can go in.
Just Too Addicted
Arm chair racerJust too addicted
I didn't touch the valves, and how do i set the air gap? and the timing is lined up
Power User
The day begins with 3WW
Make sure your ignition coil is hooked up. I snaged mine on something, and put myself through hell until I realized it was unpluged.
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Got The Holeshot
Arm chair racerJust too addicted
take the CDI cover off, between the magnet and the little black box the gap is supose to be .012 to .016 in. there is two ways to put it in, if it is not in there the right way it will not work.
Just Too Addicted
Arm chair racerJust too addicted
Allright What are the two ways it can be put in? I have it on the top (black box)
Got The Holeshot
Arm chair racerJust too addicted
the actual magnet (that sits on the cam axle) fits in there two ways. I will see if i got a pic. do u have a maual
Reply With Quote
