Results 1 to 13 of 13

Thread: Need some help with a yamaha 200cc 1985

  1. #1
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276

    Need some help with a yamaha 200cc 1985

    hello, my spark plug keeps getting all black and clogged looking, and my 3 wheeler doesnt idle... and pull cord doesnt pull back in, help plzzz

  2. #2
    sgp56's Avatar
    sgp56 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Aug 2006
    Location
    Dallas, Tx
    --
    242
    clean the carb out really good. especially pilot jet for idle.

  3. #3
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276
    ok thx, were doin that tomorrow, but do u have any suggestions on what to do to the pull cord? it often hangs down and doesnt draw in...

  4. #4
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276
    help plz? bump bump bump thx

  5. #5
    Join Date
    Mar 2006
    Location
    florida
    --
    2,328
    hmm try pb blaster (remove it from bike and spray around the pulley

  6. #6
    Join Date
    Apr 2006
    Location
    Crestview, Florida
    --
    2,429
    may need to take it aprt and rewind the spring.

  7. #7
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276
    ok, well it's runnin well, just i think it needs a carb cleanin, and a muffler it backfires quite often..

  8. #8
    troy's Avatar
    troy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Canada
    --
    254
    Quote Originally Posted by theonlyjosh
    ok, well it's runnin well, just i think it needs a carb cleanin, and a muffler it backfires quite often..
    When it backfires is it when your slowing down and down shifting, if so check your exhaust for leak's, up by the engine's head is a common spot for a leak, i had just finsh replacing mine due to the same problem your having.

  9. #9
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276
    ok thx lol, i dont have a real exaust it's just a homemade piece of *Edited**Edited**Edited**Edited*, but we will fix the leaks... i dont have the money to buy a 200$ exaust when im prolly gunna sell the trike..

  10. #10
    troy's Avatar
    troy is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Canada
    --
    254
    Quote Originally Posted by theonlyjosh
    ok thx lol, i dont have a real exaust it's just a homemade piece of *Edited**Edited**Edited**Edited*, but we will fix the leaks... i dont have the money to buy a 200$ exaust when im prolly gunna sell the trike..

    LOL.. i went to the dealer for a new one..they laughed at me and said not made anymore..Luckly i found a used one for 20 dollers. i had a home made one before, found it to loud , it was built right where it never backfired, but the community didn't like it to much (which i agree with)...but its funny how a small little leak can turn in to some thing so damaging to a engine.

  11. #11
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831
    Quote Originally Posted by theonlyjosh
    ok thx lol, i dont have a real exaust it's just a homemade piece of *Edited**Edited**Edited**Edited*, but we will fix the leaks... i dont have the money to buy a 200$ exaust when im prolly gunna sell the trike..
    You could probably get a good used exhaust for $60 or so, check ebay and the classifieds.
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

  12. #12
    Join Date
    Aug 2006
    Location
    NEBRASKA
    --
    9
    Mine did the same thing and I took it off and sprayed some silicone around the spring and haven't had any trouble since.

  13. #13
    theonlyjosh's Avatar
    theonlyjosh is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Aug 2006
    Location
    Ontario, Canada
    --
    276
    i dont live near anyone sellin a used one, and im sellin my trike anywys ij ust wanna get it runnin good enuf to sell
    I am a diehard Ford/Honda guy.

    Previous Trikes:
    1983 Honda Atc 110 (Stolen)
    1985 Yamaha 200N Tri-Moto (Sold to dad)

    Dream Trikes:
    1985-1986 Honda 350x

    Current Vehicle:
    1993 Ford Ranger XL Regular Cab, 4x4, 3.0 V6, 5 Speed.

    Dream Cars:
    1990 Ford Mustang GT 5.0 (Manual)
    2008 Ford Ranger Ext. Cab 4.0 5 Speed (Fully Loaded)

//ArrowChat Integreation Code //