CR head gasket?

[Fox250R]

How much Hp gain if any would one see with a CR head gasket? I know its all in the lowerend but do you really feel the power difference or just how much more of a *Edited**Edited**Edited**Edited**Edited* it is to kick over cause of the comp increase..

[deathman53]

you will feel a increase, but you will also be forced to use race gas.

[Fox250R]

I use it anyway

[deathman53]

if you use race gas anyway, go with the cr gasket, my bikes make around 230 psi and they aren't too hard to kick over

[Fox250R]

mines at 190 right now, if i use a CR gasket how much will it jump up?

[deathman53]

probably around 220-230

[rich250rracer]

On my quad I run a Cool Head with a 20cc dome and take apart a stock head gasket using only one thin piece (which is the same as a CR gasket). 190 pounds of compression with a fresh top end. No race gas. If you are running a stock head you should be just about the same.

[Fox250R]

so 190 to 230 then lol!!

[Fox250R]

Anybody here use a pump gas with a cr gasket?

[Ordo]

You would be safe running 93 octane. If you have a stock head and haven't milled it or the top of the cylinder. I'm running a split stock head gasket right now with other mods and run fine on 93 with no signs of detonation.

[crackshot]

What year CR gasket do you use?

[Ordo]

The 89 cr gasket part #12254-KZ3-000.