//ArrowChat Code
Results 1 to 6 of 6

Thread: Honda hubs on a Yamaha?

  1. #1
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831

    Honda hubs on a Yamaha?

    I want to change out the hubs on my YTM200 for a set that has a 4x110 bolt pattern. Will Honda 200x (83-85) hubs fit on the axel? If not then what else would work?

    I am hoping the 200x ones will work because I already have an extra set but I am not home to test them. If they don't fit then I will buy what ever else will fit before I go home next.

    Thanks for the help!
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

  2. #2
    Join Date
    Aug 2004
    Location
    Nampa, Idaho
    --
    1,245
    You might be able to find or make some adapter plates. That would probably be better than trying to interchange hubs. They probably have a different spine size and count.

  3. #3
    Join Date
    Jul 2006
    Location
    iowa
    --
    451
    i know that 225dx and 200s hubs interchange. if the 200x hubs fit a 200s and if your ytm 200 hubs will fit a 225dx, then the 200x hubs should work. also im pretty sure banshee hubs will fit a 200s and a 225dx if that helps any.

  4. #4
    Join Date
    Sep 2002
    Location
    Rittman, Ohio
    --
    6,276
    If the axle is like new, and the hubs are like new, they will fit but youll have to heat them and beat them on with a . If either your axle or the hubs have just a little bit of normal wear, they will fit right on. 200X hubs give the least rim options because they have the short studs and they will not fit later thick OEM type aluminum rims which require longer studs.

  5. #5
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831
    Ok, thanks for the help.

    Tim, I plan on using wheel spacers anyways so the stud length should not be a problem.
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

  6. #6
    traxxasx's Avatar
    traxxasx is offline Alligator sized brain can't spell you correctly. Arm chair racerRoostin Away
    Join Date
    Sep 2005
    Location
    las vegas
    --
    1,184
    Quote Originally Posted by thefox
    Ok, thanks for the help.

    Tim, I plan on using wheel spacers anyways so the stud length should not be a problem.

    Get some banshee hubs, knock the old studs out put some good thick good grade bolts in with some lock tight they get loose after a harsh ride like my freinds.
    MY FEEDBACK---
    http://www.pbnation.com/showthread.p...2#post20992142
    +6 positive feedback.
    WaLLa BinG WaLLa BoOm ShE's DoNe!!!

    MY 225 Dx
    Piped, jetted, 2 stage uni, wheel spacers.
    __________________________________
    My 82 250R
    All original even with tool kit.
    Stage 2 uni, no air box jetted.

//ArrowChat Integreation Code //