Twinkle Toes
The day begins with 3WW
Phase 5 Pipe found for the SX! (pics and a Vid)
Went and looked at a SX today. Basically stock with crappy plastics all around, dented tank, no air box (has screen over it), twist grip, key does NOT shut off engine when turned off, 18" rear tires, BUT the whole engine has been gone through and PHASE 5 PIPE. $450 and as long as I am there by friday its mine.
I have never before seen or heard of a Phase 5 for an SX, only the 200x which was on phreakfix's.
Last edited by Tri-ZNate; 09-30-2006 at 02:04 PM.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
Power User
Catch me if you can
Who makes phase 5???
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Twinkle Toes
The day begins with 3WW
No Idea. Phase 5 might be the company, like Cobra megaphones are made by Cobra.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Power User
Got the holeshot
good find, BUT... something louder than what on your other one???
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
i remember the phase 5 ads. go flip thropugh a mid 1980's dirtwheels, they were nice
Twinkle Toes
The day begins with 3WW
good find, BUT... something louder than what on your other one???
no unfortunatly this atleast has an end cap
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Twinkle Toes
The day begins with 3WW
Well I just got off the phone with the lady and tomorrow night i should be picking it up with pics. My only concern is the lack of an air filter, any suggestions as to how to throw a make shift one on or what to use?
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Twinkle Toes
The day begins with 3WW
keep in mind there is no air box so it would have to clamp or fit onto the carb itself
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Power User
Roostin Away
Just measure the carb and go to the local dealership and ask them if they have any k&n clamp on filters about that size. might be $30 but why not?
"Instruction manuals are nothing more than another man's opinion."
- Chick McGee
-1985 250sx
- 1986 atc310R drag bike
- 1981 110 chopper.
- 1985 350X 3+1 durablue axle, uni filter
- 1985/6 350x
- 2-84 atc250r's and 1 83
- 2002 trx400ex
- 1985 atc 250r
-1985 atc70 WTB PARTS
- 1985 tecate
MADE IT THROUGH TRIKEFEST 04, 05, 06, 07, and 08, cant wait til 09!!
HELLO, my name is stickers!
Catch me if you can
I got some left over diamond plate SOMEONE left at my house...Well I just got off the phone with the lady and tomorrow night i should be picking it up with pics
SX airboxes are readily available on Egay... CHEAP!
Twinkle Toes
The day begins with 3WW
I have an exta box but I just need to make a temp one so i can ride it tomorrow.
Nate
The Myth, The MAN, The Legend
R.I.P HRR
At The Back Of The Pack
Arm chair racerAt the back of the pack
why not switch whats on your present one.
I say do a clamp on if the motor has been worked over anyway.
1983 honda 70atc, als,ot done, need throttle cable and assembly. PM me if you have this.
1985 honda es 250 big red.
85 percent restore. 10x10 douglas 190's 22-11-10 at 489's. 12x7 itp c series 24-8-12 swamp fox. some accent painting. snorkel everything and a custom PCV system. moose air filter. cobra utility exhaust. 2.5 um wheel spacers.
A trike to show up the modern utilitys
2002 scrambler 400 2x4 uni pod filter, lots of weight shaving, v force reeds, HPD race pipe, 39mm pwk or 34mm, 12-1 head, trail porting, custom clutching, hole shots on t-9s +1 all around. works shocks . trail bike with drag tweeks.
Just Too Addicted
Arm chair racerJust too addicted
Take a piece of shirt or something and put it over the whole, stretched across it, and clamp it. My dad used something like that(only with a shop rag) for his /85 vulcan 750, and never had a problem.
1985 Honda 250R
1986 Yamaha Tri-z
1984 Honda 200s
1983 Honda 200x
1982 Honda 200
Administrator
The day begins with 3WW
Wheeliepop - I have a SX parts machine - PM me with what you need - I can hook you up!!!
RIP - Yamahondaman!! You will never be forgotten!
RIP - Sam Brehm!! Gone but NEVER forgotten!
RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!
Putting Priorities in Order, Busier than ever.
Catch me if you can
Just use the Handyman's secret weapon: Duct tape.
Howdy
Reply With Quote
