not sure if others work for my 85 250r i need spacers and front axle??
At The Back Of The Pack
Arm chair racerFirst time rider
not sure if others work for my 85 250r i need spacers and front axle??
savin one atc at a time
First Time Rider
Arm chair racerNew to the board
well i know that the front rim is the same. but that dosnt help you dose it?
First Time Rider
Arm chair racerNew to the board
The front hub appears to be the same as a 350X stock hub. I had a gold 250R hub on my 350X at one time so i know that much. As far as the spacers go, can't really say for sure but I bet they are the same
1985 350X
1986 250ES Big Red
(previously owned) '89 Cr 250R
2008 Toyota Tacoma Double Cab
At The Back Of The Pack
Arm chair racerAt the back of the pack
i`m pretty sure that an atc250es bigred runs the same front axle as an 85r, not sure about the spacer though.
steve
http://cgi.ebay.com/ebaymotors/HONDA...33318240QQrdZ1
Last edited by wolfspider; 09-27-2006 at 04:54 AM. Reason: addition
HONDA ATC250ESJ 1988
HONDA 250R `85 restored SOLD
HONDA ATC 350X `86 restored SOLD
HONDA ATC 250ES `87 SOLD
YAMAHA YZ100 `80 project
HONDA ATC350X `85 PROJECT FINISHED
R.I.P. Hey Ron Racing-GIT IT RAG!
Got the holeshot
i have (one) more front axel for the 85-86 ATC with spacers..
ALL Stainless Steel ... NO RUST !!! let me know
Ronnie
"07" DR650 Suzuki Dual Sport
At The Back Of The Pack
Arm chair racerFirst time rider
thanks guys for your help yamahondaman im interested let me know how much stainless steel is that stock??
Last edited by triker111; 09-27-2006 at 05:03 PM.
savin one atc at a time
Twinkle Toes
The day begins with 3WW
I have a 250R hub on my 200x front end and the spacing it off, goes to the shifter side about .5"-1" too much
Nate
The Myth, The MAN, The Legend
R.I.P HRR
Originally Posted by honda250sx
Reply With Quote
