Honda 1982 ATC250R Project (56K beware large pics)

**acidtuch10** · 10-01-2006, 02:47 PM

Acquired an ATC 250R 1982 - Starts right up and can drive it around but from what you can see from the pics its pretty beat up. So looking for parts if anyone can help, currently has a 200x front wheel but I have the original, other than that allot of little things are needed.

**super90** · 10-01-2006, 03:55 PM

If you have a sand blaster and some cash that should clean up very nice! I would get all new plastics, seat and an aftermarket exhaust (it looks like someone tried to gut that one out and reweld it. Plus powdercoat/polish/chrome some things and i think it would look pretty good! And get some nice tag bars for it.

**edog** · 10-01-2006, 07:06 PM

Looks like a good project.

**aquapunk** · 10-01-2006, 07:11 PM

could definately be a looker with a little time and coin

**acidtuch10** · 10-02-2006, 07:26 AM

Ya going to slowly piece it back together - Had a '82 ATC250R when I was a kid ... So gonna just make it nice and keep it around... I have a few 4 wheelers to beat on

**Bryan Raffa** · 10-02-2006, 08:04 AM

where in NY are you?

**Macs** · 10-02-2006, 08:17 AM

is that axle bent? from the pics it looks like something is wrong but i cant place what it is.

**crackshot** · 10-02-2006, 08:41 AM

No rear brakes?

**acidtuch10** · 10-02-2006, 10:21 AM

No Brakes - though I do have the orig front rim and brake system. Axle seems straight I have not noticed it being bent. Drove it around yesterday, I think this week I will park it tear it down and start having things power coated and sand blasted.. Winter is close so I can take my time in finding parts and such... But it runs and drives so at least its a start

I am in Westmoreland NY area

**Macs** · 10-02-2006, 10:23 AM

i cant believe i overlooked that!!!!!

**maggiesboy** · 10-02-2006, 11:04 AM

wow, I almost claimed that as one of our old trikes. We had one that we put a 200x front end on. it looked the same, right down to the rusty drive chain

lol

I don't think that thing would get packed up in Washington and make it's way to NY

**acidtuch10** · 10-02-2006, 12:17 PM

a scavenger hunt I must say. But as one can see from the pics I need
1. Rear brake set up
2. A New pipe and silencer. Aftermartket will do.
3. Plastics - I emailed maier to see if they are availiable.
4. the seat bottom I have seen the molding foam and covers online
5. Headlight - though I think I am going to forgo this and go with a number plate.
6. Motor starts on the second kick always <pretty sound motor> Though I al going to strip it down and remove the paint and possiably power coat it - or leave it unpainted.

**BigGreenMachine** · 10-02-2006, 04:20 PM

I got some inspiration for you Cid, Blazerone22's 250R thats been very nicely built. This is one of my favourite trikes of all time.

**scooterroo** · 10-02-2006, 04:29 PM

i like blazers r, that thing is sweet looking. looks like a 200x silencer on the r you have acid. bet with some time and love, you'll have it looking and riding like new in no time. goodluck with the project.

**acidtuch10** · 10-02-2006, 04:37 PM

That is an awesome trike ---- I have some good ideas now of what I am going to do.

Thread: Honda 1982 ATC250R Project (56K beware large pics)

Thread Tools

Honda 1982 ATC250R Project (56K beware large pics)