my 200s so far

**84honda200s** · 10-05-2006, 06:29 PM

well as promised i am posting an update. i am halted once again due to lack of cash. i am also stripping the recoil and repainting it. it is going to be red so is the cdi cover. well i think im not sure yet. once im done painting the recoil and get it on the trike i will take more pics. i found some 4 bolt 110mm hubs to put on it and they should be in next week sometime. i got them from a buddy. i decided im only getting back tires and rims for now.(im running out of cash fast)

now my question is with 25 inch tires on the rear what size sproket should i use?
i believe my front is 11tooth but i forgot what the rear is.

**TravEX** · 10-05-2006, 07:39 PM

I believe stock is either 10/43 or 11/43. If you have a 11, you might wanna get a 10. With the 11 and 25's, I bet you would have trouble finding the right gear in mud and stuff, probably 1st is all you'd need, hehe. I was searching on Dennis Kirk the other day, and they list a 8,9,10,11,12, and 13 front sprockets for the 200S for $9.99. I know going from 20's to 22's is 1 front tooth difference, but dunno bout 25's. Also, I would measure the tire height to see exactly what you got. The 25's I pulled off Fireball are 25-12-9's and measure 23" tall. My Duro's are same size and measure 25 1/2". Use a level and tape to get the reading.

Travis

**84honda200s** · 10-05-2006, 10:03 PM

ok i will do that when i buy and get the tires. so the biger the tire the smaller the front sproket? if so i better add 1 more thing to the must have list. lol

**84honda200s** · 10-11-2006, 10:07 PM

well here she is so far. this is only for fitting so far im still working on it.

**tyman** · 10-11-2006, 10:22 PM

yes.. bigger tires = smaller front sprocket....

nice fenders... did you cut them or will u be getting new ones?

**84honda200s** · 10-11-2006, 10:39 PM

well for now they are my #1 fenders. i needed a pair of fenders so i got them from a guy on here. he is an awsome help on this trike. i dont plan on getting new ones any time soon. im thinking of running a 9 tooth in the front.

**TravEX** · 10-11-2006, 11:16 PM

Looking good so far! I'll check for those mounts and stuff.

**IrvSLedman** · 10-11-2006, 11:56 PM

shesh, if i hadnt known you were in need of plastics that bad i wouldnt have chopped parts off my 200s fenders to melt down for repairs and woulda just donated them to you.. lol well its looking good either way, keep up the good work man, not enough attention is paid to the good ole' hard tails.

**84honda200s** · 10-12-2006, 06:37 AM

i like the hardtails believe it or not. i dont know why but i just do. thanks for all the help and input so far guys.

**team-red-rider** · 10-12-2006, 01:03 PM

rob the cdi cover and stuff on mine is red it looks nice hey since *Edited**Edited* actually working on us as im starting can u give me some details?

**TravEX** · 10-12-2006, 10:53 PM

Have you got the plastic mounted yet? I think all you need are the screws and the 4 rubber frame grommets. I have the grommets, but don't have the screws. I'll check my junk screw jar for some that can work if needed.

**84honda200s** · 10-12-2006, 10:57 PM

yea man i got it on. thanks

**84honda200s** · 10-14-2006, 04:35 PM

here it is. im still working on it. i think all thats left to do is buy tires and rims get her fired up tune in the carb and some small stuff like that.

Thread: my 200s so far

Thread Tools