Results 1 to 3 of 3

Thread: calipers are on....looking for pad suggestions. pic of rear caliper.......

  1. 10-08-2006, 11:40 PM #1
    InPiEcEs's Avatar
    InPiEcEs
    InPiEcEs is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2004
    Location
    Northeast Wisconsin
    --
    378

    calipers are on....looking for pad suggestions. pic of rear caliper.......

    I got my new rear caliper the other day for my R and got it mounted up.
    I am using a CR caliper in the front, and a KX one in the rear.
    Both identical calipers for the front on the dirtbikes taking the same pads. The only difference is the mounting bracket.
    Just wondering what brand/type of pad works best for all around aggresive use, and trail riding.
    I'm not sure what type I can use with my stock rotors vesus the MX rotors, if it matters.
    I was looking at sintered or ceramic pads. What do you guys all use out there?
    Here is a link to the pic of the rear caliper installed.........there are a few more pics of the R so far, if anyone wants to browse through.

    http://s24.photobucket.com/albums/c1...gAnch=imgAnch3
    Last edited by InPiEcEs; 10-09-2006 at 08:36 PM.
    One piece at a time. Status: The Beast is Done..06-23-07
    Back in the saddle again
    Currently owned rides:
    My sleds, and.........
    1995 CBR600F3
    1976 Kaw 400 triple-smoker......SOLD
    1986 250R...owned since 1990
    06-23-07........the R is finally done!!!
    ESR pipe, Aktive reeds/CR cage, 38mm PWK, +4 Dominator
    mild clean-up porting, an open K&N, CR and YZ calipers.......among other things
    Reply With Quote Reply With Quote
  2. 10-09-2006, 08:41 PM #2
    InPiEcEs's Avatar
    InPiEcEs
    InPiEcEs is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Apr 2004
    Location
    Northeast Wisconsin
    --
    378
    Oh yeah.....I finally got the rest of the seals I needed for the rear shock linkage.
    Now I finally have it buttoned up for the last time.
    All I need now is a new axle and carrier.
    Anyone needing collars or seals for the rear linkage needs to jump on it if they want new OEM parts.
    I had a lot of trouble getting what I needed, as half of it is no longer available.
    One piece at a time. Status: The Beast is Done..06-23-07
    Back in the saddle again
    Currently owned rides:
    My sleds, and.........
    1995 CBR600F3
    1976 Kaw 400 triple-smoker......SOLD
    1986 250R...owned since 1990
    06-23-07........the R is finally done!!!
    ESR pipe, Aktive reeds/CR cage, 38mm PWK, +4 Dominator
    mild clean-up porting, an open K&N, CR and YZ calipers.......among other things
    Reply With Quote Reply With Quote
  3. 10-09-2006, 08:45 PM #3
    3leggeddog's Avatar
    3leggeddog
    3leggeddog is offline The sun shines on a dogs ass every now and then Got the holeshot
    Join Date
    Nov 2004
    Location
    ohio
    --
    2,534
    looking sweet man!!!
    Full Walsh CRF 450 hybrid 250r
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //