I have a 86 atc 250r. I was wondering, do you have to take the forks apart to get the fork seals out? Or can they be removed from the outside.
First Time Rider
Arm chair racerNew to the board
I have a 86 atc 250r. I was wondering, do you have to take the forks apart to get the fork seals out? Or can they be removed from the outside.
Check my feedback before buying from me
Catch me if you can
nope take them apart, sorry to ruin your day
New to the board
Arm chair racerNew to the board
Must take the fork off, did mine the other night, was a mess.
At The Back Of The Pack
Arm chair racerFirst time rider
also, get the OEM fork seals. I tried the pro-moly top of the line seals, 2 rides later, they leak!
Just Too Addicted
Arm chair racerJust too addicted
http://www.3wheelerworldforums.com/s...building+forks
read it all. 350x'inNY and I did a good right up on rebuilding forks. its not hard just a little time consuming.
1985 KXT 250
84 KX cylinder
sprock racing head
+2" Miltech swingarm
frame mounted Rad
1983 250R
DG head
290cc Big Bore
CT pipe
85R front end
+1" Miltech swingarm
2+2 axle NOS NASA
18x10x9 Hoosiers
Reply With Quote