At The Back Of The Pack
Arm chair racerAt the back of the pack
Does anyone know for sure if a stock 300ex axle will work on a 350x?
yes!
I know its not as wide.
Does any one know how much shorter it is?
what I am thinking if its only a inch or two and it will fit you can get aftermarkets that are plus four inches wider than stock for a 300ex. If the stock is only 2 inches shorter then I could go after market and gain 2 inches......
Thoughts?
86 350x "O' Smokey"
83 200 auto X
84 200x
85 110
82 70
Just Too Addicted
Arm chair racerJust too addicted
there are still aftermarket axles available for the 350x
The problem with America is stupidity. I'm not saying there should be a capital punishment for stupidity, but why don't we just take the safety labels off of everything and let the problem solve itself?
85 atc350x ('05 christmas present to myself)
84 tecate (my baby)
84 honda 110 (lil buddy)
81 honda 70 (daughters ride)
86 lt250r (sold for parts) R.I.P.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Originally Posted by tecatecrazy
I think only for stock lengths?
86 350x "O' Smokey"
83 200 auto X
84 200x
85 110
82 70
Just Too Addicted
Arm chair racerJust too addicted
Durablue has allot of really nice axles for the ATC lineup. One problem is that they are very very expensive. 400EX 300EX 450R axles are saposably the same, i'm not sure but thats what i have been told.
Link to main axle page
Power User
Roostin Away
300ex axles will difinitly fit. my friends has a RPM 300ex axle in his 350x he just has to use the 300ex wheel hubs now. he broke a extended durablue 6 month then got the 300ex one.
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thats what i was wanting to here. You can pick up a + 4 300ex G force axle for 200 bucks. Much cheaper than the dura blue.
86 350x "O' Smokey"
83 200 auto X
84 200x
85 110
82 70
At The Back Of The Pack
Arm chair racerFirst time rider
I recently did this swap. Everything fit fine except for a little difference in the brake rotor hubs. Something in how long the 350x hub was or the spline length made me have to use a couple of washers for the caliper bracket to make it centered over the caliper because it wanted to put pressure on one pad but not the other. I think this swap would be much better on the 86 model because it uses a 300ex style caliper bracket to hold it in place. Not for sure but just a thought. Also if you are going to buy a g-force axle it is still going to be a couple of inches shorter than the 350x +4, and the g-force does not include a sprocket hub for the low $200 price the last time I checked, and along with the sprocket hub purchased it would be getting pretty close to a durablue +4 350x axle.
Just Too Addicted
Arm chair racerJust too addicted
www.team-ind.com has there 300ex adjustable compitition axle on sale for $139.00
they even come with the sprocket hub. you need to buy the team industries hubs to run the compitition axles as the spline count is specific for those 2 parts.
for the hubs go to www.kandkatv.com and look up the firestick hubs that are used for the firestick compitition axle. they are on sale for $69
1985 KXT 250
84 KX cylinder
sprock racing head
+2" Miltech swingarm
frame mounted Rad
1983 250R
DG head
290cc Big Bore
CT pipe
85R front end
+1" Miltech swingarm
2+2 axle NOS NASA
18x10x9 Hoosiers
Trikein' Away
Teaching quads a lesson
Dont listen to what people tell you, They are not the same. BIG diffrences betweent the 400ex axle 450 axle and 350x axles.
Reply With Quote