about the swinger bolt........
either somebody here, or on .org makes,has, or can get, a stainless steel bolt for it.
New to the board
Arm chair racerNew to the board
about the swinger bolt........
either somebody here, or on .org makes,has, or can get, a stainless steel bolt for it.
84 250R (sold)
85 250R 38mm Keihin PJ,Rad valve(w/spacer),
CR250 head gasket,all DG exhaust ,
13/37 gearing w/ 22-11x9 wooly booger type treads,
head re-chambering and +6 swinger by Ronnie,
stock jug and bottom end,
112 octane race gas w/ klotz R50 @ 32:1
Power User
Roostin Away
Use polyurathane bushings. I belive X System makes them.
3 CR500R's and counting. Do I really need 4???
Do I really need 9 Tigers?
Laegers ATC500R
DO NOT send any thing to whats his face (dirt-face/crasher) here on the board. What a scum bag. He screwed (stole) money from me and screwed me on my ME360 and Hondaline 300R engine rebuilds.
Administrator
The day begins with 3WW
I had a local machine shop make me brass bushings. Seems to be pretty good - and it was relatively cheap
RIP - Yamahondaman!! You will never be forgotten!
RIP - Sam Brehm!! Gone but NEVER forgotten!
RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!
Reply With Quote