Page 1 of 3 1 2 3 LastLast
Results 1 to 15 of 40

Thread: Got my progressive forks springs installed today.

  1. #1
    Join Date
    Oct 2004
    Location
    Maryland
    --
    3,077

    Got my progressive forks springs installed today.

    And man I'm I super happy with the front suspension on my 250r. My suspension has always been super sloppy. I just haven’t spent the money to get it redone. Well today I installed progressive fork springs, spacers, and fresh oil in my forks and WOW. I'm amazed at the difference. I'm so amazed in fact that I'm gonna have the money spent to rebuild the rear shock.

    i used to bottom the old springs constantly, but today on my test rides I really ed this front end and my fat butt couldn't even begin to bottom the front end. (sadly the rear still bottomed hard) I dropped off a 5 foot ledge, blipping the throttle to bring the whole bike off clean before starting to fall and repetitively I must landed 10 times and the front end was awesome.

    Its just as such a night and day difference I had to make a post about it. Once I get the rear rebuilt I'll try to get some real big air and get someone to take some pictures.

    its kinda sad, I've been so used to riding my half beat R that now that I know how good it could be I'm gonna spend even more money..argh...my wallets stretched so thin.

    Ultimately I wanna get it setup and try to make some races in OHIO!!!! lol


    EDIT: After reading this i'm sure everyones like...WELL DUH. But I was excited and had to get it out. SO sue me. lol. I'm just excited about being able to do crazy stuff with out jarring my skull and back.
    Last edited by Louis Mielke; 11-19-2006 at 12:01 AM.
    And that's the rest of the story. ~ Paul Harvey

    "Yes its broken, but does that really surprise you?."
    "What happened? What does it look like happened?!?!"

  2. #2
    Join Date
    Jun 2002
    Location
    Mississippi
    --
    2,552
    LOL, congrats!!!!!!!!!!!!!!!
    83 ATC70
    85 ATC70
    85 200x vintage racer
    86 500r
    Lots of parts

    My 500R


  3. #3
    Join Date
    Sep 2004
    Location
    Phoenix, AZ.
    --
    6,719
    Blog Entries
    2
    I've been wanting progressives front and back for ages. I put two inch spacers in my forks a while back with the same old saggy springs and that alone made a HUGE difference. With progressives I imagine it would be even better.

  4. #4
    3leggeddog's Avatar
    3leggeddog is offline The sun shines on a dogs ass every now and then Got the holeshot
    Join Date
    Nov 2004
    Location
    ohio
    --
    2,534
    yeah they are great.a really good invest if you do alot of jumpin,or just aggresive ridin.i run the progressives,and 1 inch spacers to keep my r from bottoming.they really help overall ride quality aswell.

    glad you are happy with them,now you just need to get your tail out here for some mx!!
    Full Walsh CRF 450 hybrid 250r

  5. #5
    Join Date
    Aug 2005
    Location
    Portland Or
    --
    412
    I know what Im doin next...
    "Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut."-Ernest Hemmingway

  6. #6
    Join Date
    Oct 2004
    Location
    Maryland
    --
    3,077
    Quote Originally Posted by 3leggeddog
    yeah they are great.a really good invest if you do alot of jumpin,or just aggresive ridin.i run the progressives,and 1 inch spacers to keep my r from bottoming.they really help overall ride quality aswell.

    glad you are happy with them,now you just need to get your tail out here for some mx!!

    As soon as I get my rear shock done I may plan a speacial trip. I've been known to drive to cleavland for a day and then come back.
    And that's the rest of the story. ~ Paul Harvey

    "Yes its broken, but does that really surprise you?."
    "What happened? What does it look like happened?!?!"

  7. #7
    Join Date
    Oct 2004
    Location
    Ontario, CANADA
    --
    4,538
    Yep I LOVE mine, and im buying my dad a set for his birthday.

    Im thinking of running spacers, im not running any yet though, hmmmm
    RPFLU member and co-owner.
    Hardtails is all we do.
    #NOLINK
    #MAKEHARDTAILSGREATAGAIN
    #SUSPENDTHIS

  8. #8
    Join Date
    Oct 2004
    Location
    Maryland
    --
    3,077
    My set came with instructions that recommended 1.5" spacers so thats what I'm running. Its a little unbalanced since my rear shock is in desperate need of a rebuild but I'm sure it'll be fine after I get it redone.
    And that's the rest of the story. ~ Paul Harvey

    "Yes its broken, but does that really surprise you?."
    "What happened? What does it look like happened?!?!"

  9. #9
    Join Date
    Jan 2004
    Location
    NJ
    --
    1,646
    Where did you buy them? Saves me the time to look for em. Thanks!
    3 CR500R's and counting. Do I really need 4???
    Do I really need 9 Tigers?
    Laegers ATC500R
    DO NOT send any thing to whats his face (dirt-face/crasher) here on the board. What a scum bag. He screwed (stole) money from me and screwed me on my ME360 and Hondaline 300R engine rebuilds.

  10. #10
    Pete is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Dec 2003
    Location
    Lino Lakes, MN
    --
    229
    I got mine from Dennis Kirk.

  11. #11
    Join Date
    Mar 2004
    Location
    North Central Ohio!!
    --
    2,712
    Louis if you watch ebay close you can snag a nice aftermarket rear shock for a little more than rebuilding the stocker. If you think the aftermarket springs were great wait till you try a good rear shock. NO Comparison to a stocker!
    2007 YAMAHA YTZ450 went to a great home RIP Sam


  12. #12
    Join Date
    Oct 2004
    Location
    Ontario, CANADA
    --
    4,538
    Yah I agree to derrick, I snagged a works rear shock for the Z off ebay for 50 bucks. Just gotta be patient!
    RPFLU member and co-owner.
    Hardtails is all we do.
    #NOLINK
    #MAKEHARDTAILSGREATAGAIN
    #SUSPENDTHIS

  13. #13
    Join Date
    Jan 2004
    Location
    NJ
    --
    1,646
    Are the springs made by Progressive Suspensions?
    3 CR500R's and counting. Do I really need 4???
    Do I really need 9 Tigers?
    Laegers ATC500R
    DO NOT send any thing to whats his face (dirt-face/crasher) here on the board. What a scum bag. He screwed (stole) money from me and screwed me on my ME360 and Hondaline 300R engine rebuilds.

  14. #14
    3leggeddog's Avatar
    3leggeddog is offline The sun shines on a dogs ass every now and then Got the holeshot
    Join Date
    Nov 2004
    Location
    ohio
    --
    2,534
    a rebuilt stocker still has it's issues.for the best performing shock,you need the dual rate.plus having it valved to your specs.,and spring set up too,man,what a combo.i spent some time on a stock suspended bike the other day on nates track.i was scared to jump the thing more then 30 foot.bottomed hard,and the springy rebound was unbearable.do what best suits you,but for seriuos jumpin,aggressive ridin,buy an aftermarket shock.
    Full Walsh CRF 450 hybrid 250r

  15. #15
    Join Date
    Nov 2002
    Location
    Kirkville, NY
    --
    3,831
    Hey there was a topic about progressive springs on one of the motorcycle forums I check in on. One of the members there found this place, they look cheap, but I haven't read through to find the shipping cost or anything.

    http://www.mawonline.com/progress.htm

    For part#...
    http://www.progressivesuspension.com/prod_search.aspx
    1984 Yamaha YT 60 Tri Zinger(current project)
    1983 Yamaha YTM 200 (rear suspension kit)..... long term project
    2004 BMW R1150R
    1972 Honda CT 70
    2007 Lifan 110

//ArrowChat Integreation Code //