Power User
The day begins with 3WW
Hello all,
I am about to finish mounting everything on the Z for tommorrow.
I have heard people around here talk about taking out the thermostat to allow a free flowing system because of thermostat failure. Is this safe? Will it allow my bike to run at an adequate temp?
I am looking at just removing the whole thermostat from the housing to allow this to happen, will this be alright? Any light shown on this is much appreciated.
Eric
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Power User
Roostin Away
from what i have heard when the thermos fail... they fail in the open position so there is no worry there... but yes you can just remove it from the housing and you will be fine with it that way...and yes it will run fine i did this with my last one and it seemed to be fine....
looking for a TRI-Z 250 to restore at the moment
LONG LIVE THE 2 STROKES !!!
Power User
Got the holeshot
i removed my whole housing and yamahondakawisuziman made me a billet "t" for replacement. it looks cleaner than that big ol' wade of metal..
1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..
FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!
Power User
The day begins with 3WW
Thanks guys
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Reply With Quote
