Formerly barry_mann
Got the holeshot
I am looking at some new wheels for the atc70. i have been looking at inland atv but i have emailed them questions and they have not responeded. has anyone bought these wheels from them yet. who else sales a nice set. Is there any other wheels ( off of a diffrent machine ) that will fit on the atc70.
Power User
The day begins with 3WW
Dr. atv has nice wheels and if you really want the flat track look all you have to do is buy go kart wheels and tires. You can get slicks or dirt tires.
Formerly barry_mann
Got the holeshot
i looked at dratv but didnt see any of the nice chrome front wheels. I think that might be my problem. I think the wheel spacers and the flat track tires would look good.
Power User
Roostin Away
Barry, the aluminum wheels from Dratv works on the front too.
Hoarder of the finest junk
'82 YT175
'83 YTM200
'85 KLT110
'86 Moto 4 225
'84 TRX200 trike conversion.
'87 Tecate 4
Lots of vintage and not so vintage two wheeled stuff.
Formerly barry_mann
Got the holeshot
I was ust out there looking at the 70, it looks like the wheels are all interchangeable but my front tire is a diffrent size. this will be great.
At The Back Of The Pack
Arm chair racerAt the back of the pack
so if I understand this correctly, the 8x8 3lug Douglas wheel will fit on the front end of the 70? Then all I have to do is find a 16x 8" front tire?
Power User
Roostin Away
I believe it says that on their site actually, with modification of the wheel spacers due to the off set.
Hoarder of the finest junk
'82 YT175
'83 YTM200
'85 KLT110
'86 Moto 4 225
'84 TRX200 trike conversion.
'87 Tecate 4
Lots of vintage and not so vintage two wheeled stuff.
Aficionado of white surprise sauces.
Arm chair racerRoostin Away
I have douglas 6 wide by 8 tall black label aluminum rims. Wrapped in nankang 16 by 6.5 wide rubber, makes a great setup. I love it.
Went with the centered rim for the front (obviously) and a 1 inch to the outside offset on the rear for a wider footprint.
1986 Honda ATC 200 S
Some quads and a S x S
-------------
Supporter of Uncle Rico's football camp. Since 1982.
If you are reading this in English, thank a U.S. Military VET. ΜΟΛΩΝ ΛΑΒΕ
Formerly barry_mann
Got the holeshot
i went ahead and went with inland atv's wheels. Whatever size that was for the cheap price. i got a great deal on all three wheels and a new aluminum baja grab bar.
I now have just about everything to get started except my motor. the original runs pretty good. i think i will keep it i there until it goes out then put the lifan in it. I just need to rebuild the pull starter, install the new points and rebuild the carb.
Reply With Quote