1986 prefered but 1985 will work too. Putting the finishing touches on the Tri-Z t-shirt design.
Power User
The day begins with 3WW
1986 prefered but 1985 will work too. Putting the finishing touches on the Tri-Z t-shirt design.
R.I.P. Hey Ron Racing-GIT IT RAG!
Got the holeshot
I CAN'T WAIT !!!! FIVE for Me !! let me know......
"07" DR650 Suzuki Dual Sport
Power User
The day begins with 3WW
This is pretty much what it will look like. The Z is more or less correct but the Tri- is not right. I kinda like it this way but will use the original most likely.
Then all I have to do is figure out what I'll do on the front and get the screens ready and
Power User
Teaching quads a lesson
dammit, you need to hook us t3 guys up with some shirts. i know i'd buy a few off yah.
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
Power User
The day begins with 3WW
Originally Posted by scooterroo
Already in the works.
Got The Holeshot
Arm chair racerJust too addicted
Doug did you notice i was wearing your R shirt in the recent trike shoot,i had quite a few guys ask were it came from.Already in the works.
Aussie
Keeping 3 Wheelers Alive Downunder !
I'm the one with all the 2 stroke around here!
The day begins with 3WW
will this work?
Last edited by Mosh; 02-10-2007 at 10:59 AM.
Here is where my long useless list of stuff nobody cares about should go...
Proudly NOT a member of
"Team on the Teat"
New to the board
Arm chair racerNew to the board
That is a sweet design. The tri-z looks good on that shirt.
I'm a wheeler Nut!
Power User
The day begins with 3WW
Yep! Very cool. Hopefully soon I'll get that design done and on the shelf so I can print them out whenever I need to make a few. I'm hoping to have a new 250R one done soon also.
Yes it will! Thanks.
Power User
Teaching quads a lesson
sawwweeeeeeeetttttttttttttt on the t3 shirts, let us know when they are ready and i am ordering me up a few. what kinds, just t-shirts? or long sleeve t-shirts as well?
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
First Time Rider
Arm chair racerNew to the board
let me know when there ready im in for one!
Power User
Roostin Away
I'd be down for a 70 shirt or two if that ever happened.Already in the works.
Hoarder of the finest junk
'82 YT175
'83 YTM200
'85 KLT110
'86 Moto 4 225
'84 TRX200 trike conversion.
'87 Tecate 4
Lots of vintage and not so vintage two wheeled stuff.
Power User
Roostin Away
All I have is this from a generic cafrepress store I made in about ten minutes a year or two ago...
www.cafepress.com/tri_z
Survivor TF05, TF06, & TF07
Survivor BF05 & BF06
1985 350X
2000 Banshee
1992 Indy Sport - SOLD!!!
350XRiders Online Merchandise
ATC 350X Online Merchandise
TRI-Z Online Merchandise
Just Too Addicted
Arm chair racerJust too addicted
I figured you might have seen this already, but I thought it might give you some ideas. This came from one of the old 3&4 wheel action mags that I have.
Power User
The day begins with 3WW
I think xTrumpx might be into doing some of those. I do however have that Honda one finished except for the screens. It's probably the only one of those I'll mess with. However it will not be a full jersey with printing on the sleeves and everything. Just t-shirts, long sleeve t's and maybe some of the 3/4 sleeve jerseys like I did last time. Oh and some hoodies!I figured you might have seen this already, but I thought it might give you some ideas. This came from one of the old 3&4 wheel action mags that I have.
The T3 one will be more along the lines of this Tri-Z one. I'm messing around with a 86-87 T3 image and a Jimmy White one (full sideways, real sweet).
I changed the Z one with the proper logo just now. How do you guys like it with the logo being partially behind the trike/rider? I kinda like it that way.
Planning one but haven't started it yet. Got it all in my head. I may need the boards help getting an image from the angle I want for it.I'd be down for a 70 shirt or two if that ever happened.
Reply With Quote
