after i loosen the 2 back bolts on an 84 250 r what do i do to tighten the chain?
At The Back Of The Pack
Arm chair racerFirst time rider
after i loosen the 2 back bolts on an 84 250 r what do i do to tighten the chain?
At The Back Of The Pack
Arm chair racerFirst time rider
If its the same as a 350x you need to turn the entire bearing carrier, there should be holes on one side of it yhat you can put a tool in to turn it, good luck
2003 honda shadow 1100 spirit
94 XR600R
70 qa 50 with a 90cc motor in it
87 XR80R
82 XR500R
1972 Honda z50A mini trail,,, Finally got a stock mini
1981 CR450R
2004 chevy silverado ls ext. cab 4x4 5.3L
Power User
Teaching quads a lesson
dont beat the carrier with a screw driver!!! put the screw driver through the sprocket and rotate the tires to push the screw driver and move the carrier.
At The Back Of The Pack
Arm chair racerFirst time rider
ok thanks guys
At The Back Of The Pack
Arm chair racerFirst time rider
Did you get it adjusted ok? What did ya do, let us know
2003 honda shadow 1100 spirit
94 XR600R
70 qa 50 with a 90cc motor in it
87 XR80R
82 XR500R
1972 Honda z50A mini trail,,, Finally got a stock mini
1981 CR450R
2004 chevy silverado ls ext. cab 4x4 5.3L
At The Back Of The Pack
Arm chair racerFirst time rider
no i still cant get it
Power User
Roostin Away
do you have a bolt in the center of the rear of the swingarm? if so, remove that and loosen the two outer bolts,, and then pivot the carrier!
Ride it like you stole it! And never look back! They are too far behind to see!
At The Back Of The Pack
Arm chair racerFirst time rider
yea i tried it but i'll try again
Reply With Quote