At The Back Of The Pack
Arm chair racerAt the back of the pack
I have not posted here in awhile. I have had a lot of other projects going on and have pushed the Honda's to the rear. Anyway somebody outran me so I had to step it up a little............It is a wet system. The solinoids are mounted in the airbox and the battery,fuel cell and fuel pump go in a cooler on the rear rack....For some reason I just had to order a new clutch...Go Figure........
I would rather have a sister in a whorehouse,than a brother with a quad!!!!!!!!!!!!!!!!!!!!!! Still walking the "Tightrope"
At The Back Of The Pack
Arm chair racerAt the back of the pack
Sweet get up.
'07 Raptor 700R Special Edition
-Fly Handle Bars
-Spider Grips
-GYTR High Flow Intake
-Power Commander
-GYTR Radiator Screen
-GYTR Works Clutch Kit
-Pro Armor front bumper
-no baffle
-18x10-9 ITP HoleShot MXR6's
Kindergarden Speller
4 Wheels? Huh?
nice man. there will be no out running now.
down to parts because i no longer have a place to ride trikes.
GIT IT RAAAGGGGG !!!!
Power User
Teaching quads a lesson
nice but that bottle bracket looks flimsy. so what kit did you use? how does the 250r like the bottle?
Loves Corn.
Catch me if you can
you should put the bottle in the cooler also with the shut off sticking out a hole to complete the sleeper effect! lol
At The Back Of The Pack
Arm chair racerAt the back of the pack
I kind of pieced the kit together with the parts I needed. I am friends with the local NOS dealer. It has the plastic lines from the solenoids to the nozzle tapped into the reed housing. It sure wakes it up. I have to mess with it a little more but at high rpms with it stretched out the thing comes on strong. It is not that great from a stop. So I hit it at WOT after 3rd gear and it just keeps pulling. As far as the bracket being flimsy. Not at all. It is a solid billet bottle holder. The bottle does not move. As far as hiding the bottle..NEVER.. It gets more looks and people pointing at it than ever before.
I would rather have a sister in a whorehouse,than a brother with a quad!!!!!!!!!!!!!!!!!!!!!! Still walking the "Tightrope"
Roostin' Away
Arm chair racerRoostin Away
how did you rig up the fuel delivery? A second fuel pump? Just curious?
Lookin good!
YTM-200, Wheeling machine!!!
1985 Honda 200x...
...Just a simple mild 200x
At The Back Of The Pack
Arm chair racerAt the back of the pack
I bought a one quart JR. Jragster fuel cell from Summit Racing for fuel. I did not want to tap another hole in my tank for fuel. I could not put a Y fitting either because the electric fuel pump will pull from the carb. I have a tiny inline fuel pump. It is about4 inches long and 1 .5 inch diameter. For power I have a real small battery I bought at a hobby shop. The solenoids are mounted in the airbox upside down and I used the two screws that screw the airbox to the frame to secure them. I like everything in the cooler so I can easily remove it. I hate the way it looks with the six pack rack so I put my polished DG grab bar back on. The Nitrous is not for "NORMAL" riding. I can mount and rig it on in about 30 minutes. I take the spray nozzle out and screw in a pipe plug.
I would rather have a sister in a whorehouse,than a brother with a quad!!!!!!!!!!!!!!!!!!!!!! Still walking the "Tightrope"
Power User
Teaching quads a lesson
i just have one more question. my 250r will not keep the front tire down in 3rd so how does the stock swinger work for you on the bottle.
Check my feedback before buying from me
Catch me if you can
how does the nos effect the realialbility of the motor? dosnt it get leaned out when its used?
Reply With Quote
