I know I should get the stock flap, but I thought this would work for now. I have about $7 in to it. I was wondering what you thought? Don't be too hard on me it is temporary.
At The Back Of The Pack
Arm chair racerFirst time rider
I know I should get the stock flap, but I thought this would work for now. I have about $7 in to it. I was wondering what you thought? Don't be too hard on me it is temporary.
Just Too Addicted
Arm chair racerJust too addicted
looks good -D
At The Back Of The Pack
Arm chair racerFirst time rider
Thats relly good,,, How did you dit exactly,,, post some pics of your whole trike,, it looks really nice
2003 honda shadow 1100 spirit
94 XR600R
70 qa 50 with a 90cc motor in it
87 XR80R
82 XR500R
1972 Honda z50A mini trail,,, Finally got a stock mini
1981 CR450R
2004 chevy silverado ls ext. cab 4x4 5.3L
At The Back Of The Pack
Arm chair racerFirst time rider
I bought a piece of black cove vinyl base and cut it to size. Then I mixed up some epoxy and applied it with a q-tip to the top edge of the cove part of the base (the part that would go on toward the floor) an slid it into the factory groove in the fenders. I set them on the floor front up and put some tape to hold it in place. If I ever find the factory garnsih I can just slice or pry it out because the base it easy to cut. I used my scissors from the kitchen. But is also tough. Total cost for it with no stickers was $1.05. The base is on sale at Menards for .99 a stick.
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
that is outstanding roofinggun !!!
i too have attemped to make one of those but with some thick plastic i'd picked up somewhere.
great tip on the stock you used, gotta get to menards !
john
At The Back Of The Pack
Arm chair racerFirst time rider
Good job on the fender and the pics. :clap
Just Too Addicted
Arm chair racerJust too addicted
it looks professional! -D
1985 Tecate restoration project-R.I.P
Power User
Lord of the trike
Nice job...looks pretty clean
[20:55] <waterpumper> putting a racing pipe on a Foreman is like putting a high dollar bikini on a 400 pound chick...just because it fits doesn't mean it looks cool
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
yep, it was on sale ! i got mine cut out + epoxy is still curing.
i'll get a pic up of mine when all done.
john
Reply With Quote