Yamaha YTM-200E final drive

[Yamada]

Ok, the final drive of my trike broke. I have dismanteled everything and the pignon losed half of it dents.
I try to buy a used differential put none of the place i have called have one.
I heard that i can put a ytm-225 final drive. what need to be done to make it work.
also, one of the guy i called say that he can order a new part. What can be the value of that part?
I checked on bikebandit and this part it not listed.
What can I do now.
View the part on bikebandit, it is the pignon.

http://houseofmotorcycles.bikebandit...200EL.asp#stay

[Yamahauler]

Hey
exact same thing happened to me.I put a YTM 225 DIfferential on it.

You need to take the cover plate off the 225 diff and bolt the ytm 200 bearing carrier onto it. there is a few things you need to swap over...i did this last winter and if you get a 225 diff... you will have all the parts you need...its just a matter of swapping parts from one diff to another..

If you use the 225 diff..it gears the trike up 15% from stock. Its geared way too high for it.. Im going to be getting 22 inch tires to compensate.

But if you cant find a new 200 diff...use the 225 one. Its good enough.

Pm me if you have anymore questions.

[Yamada]

Ok, thank you.

[Yamawheeler]

I would like the info on how to change these out please