Results 1 to 3 of 3

Thread: got some 200x clutch slippage!!! HELPS!

  1. #1
    speed20 is offline Check my feedback before buying from me Arm chair racerJust too addicted
    Join Date
    Jun 2002
    Location
    OH-IO
    --
    816

    got some 200x clutch slippage!!! HELPS!

    Hey, clutch was workin fine till i got to my friends house....then naturally it goes to trailprotrailprotrailprotrailpro.......maybe i need another clutch...(obviously).....any ideas on what could be wrong???

  2. #2
    Join Date
    Apr 2002
    Location
    s.w. michigan
    --
    6,498

    bad luck clutch,,,

    hey brad, at worst just new clutch fibers, normally you can rough up those steel plates on a concrete floor if thet ain't warped ( normally not).
    clutch cable good ( as in not hanging up) ???
    if you need the tool to remove that weirdo nut holding the clutch bassket on i can help ya out ( as long as you mail it back to me when done ).

    john

  3. #3
    speed20 is offline Check my feedback before buying from me Arm chair racerJust too addicted
    Join Date
    Jun 2002
    Location
    OH-IO
    --
    816

    yeah....

    Yeah my clutch cable is new......Im thinking im going to put one of my other clutches in it until i get another in the mail.....i was going down the road in 3rd at about 1/4 throttle and blipped it and it kinda revved up like i missed a gear.....and i knew something was wrong, but didnt know until i blipped the throttle again and knew it was the clutch slippin....thanks for the info!!! Knew i could count on ya BUDDY!!!

//ArrowChat Integreation Code //