Results 1 to 9 of 9

Thread: Which exhaust for my 85 R?

  1. #1
    Join Date
    Dec 2006
    Location
    Texas
    --
    38

    Which exhaust for my 85 R?

    Hey guys

    Im looking to upgrade the pipe/silencer on my 85 R and cant narrow it down any further.

    I have narrowed it down to ESR or paul turner, but am unsure of which brand or variation to get. I plan on doing a 310 ESR cylinder upgrade when its time for a rebuild and want to buy the pipe just once.

    I do a lot of wide open throttle riding, with some aggressive trail riding (nothing real tight and slow).

    So i look to the experts to help me figure out which one to buy.


    thanks in advance
    Jared

  2. #2
    Join Date
    Jun 2002
    Location
    Mississippi
    --
    2,552
    do you have the factory exhaust? if so i have a DG set up that i will trade you. I am restory a bike and need the factory set up. The DG stuff is nice.

    it would not be the best for a 310 set up though.
    83 ATC70
    85 ATC70
    85 200x vintage racer
    86 500r
    Lots of parts

    My 500R


  3. #3
    Join Date
    Feb 2006
    Location
    Rochester NY
    --
    137
    I personally prefer the paul turner high rev pipe because it's good for low mid and power. But thats just my preference.
    85 200x-sold
    82 185s
    85 250r
    92 cr500R
    94 Arctic Cat Thundercat 900





  4. #4
    Join Date
    Dec 2006
    Location
    Texas
    --
    38
    Im leading toward the Paul turner hi rev, but which silencer would be recommended. Just curious of how loud/annoying is the regular one over the "quiet" one.

    Also any recommendations of a reputable place to buy it from?

  5. #5
    Join Date
    Nov 2006
    Location
    Florida
    --
    1,663

  6. #6
    Join Date
    Dec 2006
    Location
    Texas
    --
    38
    Thanks thats the place i had in mind.

  7. #7
    Join Date
    Dec 2006
    Location
    Texas
    --
    38
    Anyone have any opinions/input on which silencer to get?

  8. #8
    Join Date
    Nov 2006
    Location
    Florida
    --
    1,663
    The fatboy 2 they recommend for the paul turners is good
    Even DG's wrk out well

  9. #9
    atcsteve's Avatar
    atcsteve is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jun 2004
    Location
    arizona
    --
    157
    If your doing an ESR 310,I would get the ESR trx5 center mount pipe they rock.I do run a paul turner hi-rev on my 250r quad,and it makes great low end power!The ESR pipe makes better all around power!!!!
    85 250r drag bike

    87 trx 250r ESR big bore

//ArrowChat Integreation Code //