Anybody have a Honda flywheel puller?
I'll pay for the shipping both ways if you will lend it out.
Or it may be cheaper to buy one if I could find one.
Part # 07733-0020000
Any ideas?
Need to pull the flywheel off a 85 250es.
First Time Rider
Arm chair racerNew to the board
Anybody have a Honda flywheel puller?
I'll pay for the shipping both ways if you will lend it out.
Or it may be cheaper to buy one if I could find one.
Part # 07733-0020000
Any ideas?
Need to pull the flywheel off a 85 250es.
85 Honda Big Red 250 es
85 BMW 318
67 Chevy C10 383 M21
Got The Holeshot
Arm chair racerJust too addicted
On ebay they are cheap.
First Time Rider
Arm chair racerNew to the board
http://cgi.ebay.ca/Honda-CR-ATC-250-...QQcmdZViewItem
Can't find one that says 250es/sx
This one say 250 r but not sure if it is the same?
At The Back Of The Pack
Arm chair racerFirst time rider
Look in the dennis kirk catalog in the puller section to find the thread size and pitch ,then go to napa or a bolt selling place and buy a hard bolt.It will work fine and cost about 2 bux.grease the tip of the bolt when you pull the flywheel.
85-70,79-110,79-110,80-110,86-250ES,85 250r,86 350x,82 250r
Banned
The day begins with 3WW
Originally Posted by BigRedBlair
Are you sure its a flywheel puller you are looking for? Im looking at the photo you posted, and its showing the two clutches.
Two stroke pullers rarely, if ever, work on 4 stroke, oil immursed flywheels. 250R is not the same.
Denniskirk.com
Dennis Kirk PN# 28-1977 $10.99 20mm x 1.5, right hand
First Time Rider
Arm chair racerNew to the board
opps posted the wrong pic.
Thanks guys I found one localy wasn't easy
Cheers
Reply With Quote