Results 1 to 2 of 2

Thread: 200s intake help

  1. #1
    Join Date
    Jul 2006
    Location
    western ny
    --
    3,366

    200s intake help

    ok guys i am putting a 28mm mikuni carb on my 84 200s. i am also making a costume intake for it to mount to. i have the mounting plate cutouts done. i need to get them cut out of steel now. but the only problem im having is where do i want the carb to go? ive seen somewhere that someone had the carb coming out of the recoil side of the frame. i guess what im asking is... does it matter how long of a tube i have? will it effect the performance? if so can it be made up threw the jetting? also does anyone have pictures of a costume intake set up? oooo yea i forgot to mention that the carb is off a sled. i have like 2 or 3 of them and no sled. so i figured i would give it a whorl. any help or pictures would be great.




    thank you in advance
    down to parts because i no longer have a place to ride trikes.

    GIT IT RAAAGGGGG !!!!

  2. #2
    Join Date
    Mar 2006
    Location
    florida
    --
    2,328
    im not sure rob but on my 110 i dremeled the intake tube so itd flow better and io used an oxy. torch to straighten it

//ArrowChat Integreation Code //