Ytm-200 redneck exhaust ;)

**Yamada** · 01-20-2007, 10:00 AM

I buy this exhaust on ebay.
http://cgi.ebay.ca/ws/eBayISAPI.dll?...079049524&rd=1
Does anyone ever try to put a slip-on like this on a trike.
I buy it because it is very cheap. 6$ heyhey
I kow that the engine it came from is a least 5 times bigger put I decide to give it a try. Im pretty sure I ca make it fit.
Where can I find a headpipe for a ytm-200 here in Canada?
The cheaper woud be the better. :P
Can a normal muffler garage bend a pipe small like this?

**troy** · 01-20-2007, 10:26 PM

Good luck...lol...i went to the dealer here . Don't make them any more , and they can't cross ref them with anything else

...How ever you can get them made at a automotive parts dealer, or find one at a ATV salvage yard (used that is)..

**SYKO** · 01-20-2007, 10:29 PM

dude that silencer is GINORMOUS!!! enjoy!!

**troy** · 01-20-2007, 10:35 PM

Originally Posted by sykolincoln

dude that silencer is GINORMOUS!!! enjoy!!

i was thinking that to...i'm thinking he might have problems? backfiring maybe?...i dunno seems big for a YTM 200. i know mine was cranky when i had a small little hole in the exhaust pipe

**WIkid500** · 01-21-2007, 12:12 AM

I kind of guted the stock muffler on mine. I drove a rod through the center all the way to the front, that got rid of the spark arestor, and a few baffles. Then for a bit of noise I punched 2 1/2" holes on the inner wall of the muffler near the outlet.

It is perfect, at idle it sounds almost stock with a little thump. Mid range is good not obnoxious or anything, just nice. Then when you get on her the high rpm's sound real nice. It's like shawing! But not so loud you need ear plugs.

Mine runs good.

**Yamada** · 01-21-2007, 12:27 PM

I m sure that it wil backfire a lot less than my old rusty pipe. The pipe was broke just after the exhaust flange and bolt. I just want to be sure that there will be no leaks.
Hey Troy, do you cross reference with a Yamaha BW or TW 200. the engine are very similar, except that the Bw have manual trans. I don t know if the headpipe is different because of the frame.

**honda200** · 01-21-2007, 08:16 PM

The head pipes are different

Good luck jetting if you do make it work

**200x newby** · 01-21-2007, 08:39 PM

it should work just fine i put a 450r silencer and head pipe on my 86 200x and took off the end cap and there is no back fire and it looks sweet sounds great and runs awsome

**Yamada** · 01-21-2007, 08:42 PM

Yes, I know that I will have to make a completely new headpipe.

**Yamada** · 01-21-2007, 08:46 PM

Originally Posted by 200x newby

it should work just fine i put a 450r silencer and head pipe on my 86 200x and took off the end cap and there is no back fire and it looks sweet sounds great and runs awsome

I thought that the 450R had a twin headpipe?
How do you made it fit?

**200x newby** · 01-21-2007, 10:32 PM

no 400ex has a twin head pipe 450r is one single i think 1in 3/4 pipe into muffler
heres my post of it just a lil heat a lil bending and some moderate welding and it looks good. the exhaust looks better than the trike but hey its a beat and it runs and it moves so at least i have a trike to ride. http://www.3wheelerworldforums.com/s...ad.php?t=61254

Thread: Ytm-200 redneck exhaust ;)

Thread Tools

Ytm-200 redneck exhaust ;)