Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast
Results 46 to 60 of 69

Thread: OFFICIAL TF-07 Drags Classes & Rules

  1. #46
    Join Date
    Jan 2003
    Location
    Belsano, PA
    --
    1,387

    No Aftermarket needed!!!

    The Hondas don't need aftermarket stuff to displace BIG #s!!! Right Jason???!!!! inside?

  2. #47
    Howdy's Avatar
    Howdy is offline Putting Priorities in Order, Busier than ever. Catch me if you can
    Join Date
    Sep 2002
    Location
    Celina, Ohio
    --
    10,079
    Quote Originally Posted by 03 ORANGE SHEE
    i see, if i buy a sprock 310 kit, put it in a oem tri-z cylinder i can run in the general, thats what ill do, should be a few running that. but the honda guys with the 310cc have to run open due to an aftermarket cylinder.mmm. those two should pair up, thats fair , isnt it??
    maybe someone should start a pole, take a vote on another class called modifed. this is the first time i have even seen drags rules run like this. every one ive been to is based on cc size and either stock or modifed motors, have any of you out there seen a 250cc 250r fourtrax race a r-6 motor in a raptor inthe same class, i havent, its unheard of other than in a pre-trial race
    and wheelie bars in general class, that takes the fun out of it, thats should be in the open in my opinion, but thats just me...
    and craig, yeah, i enjoy the us 90 more than any other atv i own (even though i dont ride it)
    Please remember the TF Drags are a work inprogress. Just as Trikefest is and has been since the start. The only way to 100% effectively set up Drag class structures and or rules that would fit for everyone, would be to put everyone in their own class. Doing that isn't possible. Also, more classes would mean less grudge matches ( we do have a limited amount of time ). I hope you understand.

    Thanks
    Howdy

  3. #48
    Billy Golightly's Avatar
    Billy Golightly is offline Always finding new and exciting ways to not give a hoot in hell Catch me if you can
    Join Date
    Sep 2002
    Location
    Live Oak, FL
    --
    15,069
    Blog Entries
    14
    There wont be any stock 250Rs running against anything R6 powered...

  4. #49
    Join Date
    Jan 2004
    Location
    Palmetto,Florida
    --
    2,300
    HUMMMMM ....a "Pole".... that makes sence... Can "WE" do that ?
    "07" DR650 Suzuki Dual Sport

  5. #50
    Join Date
    Jan 2005
    Location
    Jones, Michigan
    --
    1,821
    Quote Originally Posted by 03 ORANGE SHEE
    i see, if i buy a sprock 310 kit, put it in a oem tri-z cylinder i can run in the general, thats what ill do, should be a few running that. but the honda guys with the 310cc have to run open due to an aftermarket cylinder.mmm. those two should pair up, thats fair , isnt it??
    maybe someone should start a pole, take a vote on another class called modifed. this is the first time i have even seen drags rules run like this. every one ive been to is based on cc size and either stock or modifed motors, have any of you out there seen a 250cc 250r fourtrax race a r-6 motor in a raptor inthe same class, i havent, its unheard of other than in a pre-trial race
    and wheelie bars in general class, that takes the fun out of it, thats should be in the open in my opinion, but thats just me...
    and craig, yeah, i enjoy the us 90 more than any other atv i own (even though i dont ride it)

    well said


    I understand its all a work in progress and so on but i also feel there should be a class called modified like raffa originally brought up, 310's 330's etc...
    "Instruction manuals are nothing more than another man's opinion."
    - Chick McGee




    -1985 250sx
    - 1986 atc310R drag bike
    - 1981 110 chopper.
    - 1985 350X 3+1 durablue axle, uni filter
    - 1985/6 350x
    - 2-84 atc250r's and 1 83
    - 2002 trx400ex
    - 1985 atc 250r
    -1985 atc70 WTB PARTS
    - 1985 tecate

    MADE IT THROUGH TRIKEFEST 04, 05, 06, 07, and 08, cant wait til 09!!

  6. #51
    Join Date
    Jun 2005
    Location
    Jackson MI
    --
    1,688
    Speedbump, all I know Is, I love my little 310 & I will do everything In my power to NOT see you In a dress Ha Ha. I don't think everyone will ever be happy. Nathan, I will be sure to get a race against the mighty wing clipper on the strip this year.

    83 ATC 60-R Cr60 converted with Zinger parts.
    83 ATC 70.
    83 Tri zinger
    ATC 85-R Cr85 engine on shortened 86-R frame.
    ATC450AF
    86 310-R Drag racer
    440 snowmobile powered custom built.
    87 Cr 500 Converted to Drag racer

  7. #52
    Join Date
    Mar 2004
    Location
    North Central Ohio!!
    --
    2,712
    Way I remember it from last year, Nathan was running with the 500's just for competition.



    "What kinda BS Pictures are these..........This is a Tease Thread....Im getting Better updates from Nathan,,,,,From all the Stories he is telling me the mental Pictures are Better....All of you need to have the Inside line....Let me tell you what is most important here........

    TRI-Z's are Dominating the Strip.....Nathan called me last night wanting to know if the West Coast 250R's are Ummmmm,,,,,FASTER

    He did say though that there is a Pissed off Banshee that is Beating everyone and that Billy Took Yamahondaman once in the Drags....By about a Bike length at the End....He did have to play Catch up..." MyWifeKnowsEverything




    " Got off the phone again with nathan about 4 yrs ago......They had the Elimination Drags......Nathan and Ronnie beat ALL the R's out there and had to move up to the 500's...Which I guess they lost by the Hairs on their Chin Looks like some Wings go Clipped " MyWifeKnowsEverything



    These quotes are from last years TF thread. Open class seems like a fair race to me.
    2007 YAMAHA YTZ450 went to a great home RIP Sam


  8. #53
    Join Date
    Jan 2004
    Location
    Palmetto,Florida
    --
    2,300
    Quote Originally Posted by Jason Hall
    I will be sure to get a race against the mighty wing clipper on the strip this year.
    ........... ............. iv'e got "our" Race BLOWED UP and Hang'n in the Living Room..I Look at it EVERY Day .... I'm Sharpening my Clipper's to get Another "Wing Clipper Shot" to Hang next to it ...
    .................................................. .................................................. .......................
    Hey "YOU" BIG-BLOCK Guy's .....Remember ...... "TWO BIKES" Outa Hole !!
    "07" DR650 Suzuki Dual Sport

  9. #54
    Mosh is offline I'm the one with all the 2 stroke around here! The day begins with 3WW
    Join Date
    Jun 2005
    Location
    na
    --
    5,702
    Quote Originally Posted by Jason Hall
    Speedbump, all I know Is, I love my little 310 & I will do everything In my power to NOT see you In a dress Ha Ha. I don't think everyone will ever be happy. Nathan, I will be sure to get a race against the mighty wing clipper on the strip this year.
    The dress.That is what I am talkin bout.It will be interesting .
    Here is where my long useless list of stuff nobody cares about should go...


    Proudly NOT a member of

    "Team on the Teat"

  10. #55
    Join Date
    Jan 2004
    Location
    Palmetto,Florida
    --
    2,300
    I CAN'T WAIT !!! i'm also Bring'n (TWO) Blow Up Doll's for "the Camera"
    "07" DR650 Suzuki Dual Sport

  11. #56
    Join Date
    Jan 2003
    Location
    Belsano, PA
    --
    1,387
    All I know is...SOMEBODY better beat Sprock! I ain't wearin no dress!!!! Actually, I think this is one of those NO-Win situations....well for everyone else. WHOEVER loses this little bet will have to wear a dress and guess what? I don't think ANYONE will be the same after seeing EITHER of us that way!!!!

    BTW, how I remember it.....My R only lost ONE run to Nathan's Z. THAT is NOT wing clippin!

  12. #57
    Join Date
    Jan 2006
    Location
    conesus lake NY
    --
    11,894
    Blog Entries
    1
    [QUOTE=SpeedBump]All I know is...SOMEBODY better beat Sprock! I ain't wearin no dress!!!! Actually, I think this is one of those NO-Win situations....well for everyone else. WHOEVER loses this little bet will have to wear a dress and guess what? I don't think ANYONE will be the same after seeing EITHER of us that way!!!!

    Hummmmm....side bets????????

  13. #58
    Join Date
    Jun 2005
    Location
    Jackson MI
    --
    1,688
    Yamahondaman, you did get lucky & catch me stumblin out of the gate once did'nt ya. You guys make me laugh

    83 ATC 60-R Cr60 converted with Zinger parts.
    83 ATC 70.
    83 Tri zinger
    ATC 85-R Cr85 engine on shortened 86-R frame.
    ATC450AF
    86 310-R Drag racer
    440 snowmobile powered custom built.
    87 Cr 500 Converted to Drag racer

  14. #59
    Join Date
    Nov 2003
    Location
    Front royal, va
    --
    2,186
    yeah, if we all rode one kind of maufactured trike then what would we rag on?..
    there wouldnt be a honda vs. mahaya debate!
    1985 With "86" Plastic's,Custom 12" Alluminum Extended Swing Arm,39MM PWK,"TRX" Filter,9 Paddle TALLER HALLER'S on 11" Wide Rim's,LOT'S of Stainless,LOT'S of Alluminum,LOT'S of PowderCoating,NOTHING Stock..

    FASTEST Tri-Z on The Planet...MAKE A NOTE !! and the SECOND FASTEST, WRITE IT DOWN AGAIN!!!

  15. #60
    Join Date
    Jan 2004
    Location
    Palmetto,Florida
    --
    2,300
    Quote Originally Posted by Jason Hall
    Yamahondaman, you did get lucky & catch me stumblin out of the gate once did'nt ya. You guys make me laugh
    YA .. the first time we raced i "stumbled" and you got lucky..then i thought that it would EVER happen again .... and it didn't...
    General "Ribbing" is fun EH MATE ...
    "07" DR650 Suzuki Dual Sport

//ArrowChat Integreation Code //