Registered User
New to the board
1983 200e reverse?
i'm new to the game, i have a 1983 200e big red, there is a small shaft down by the gear shifter, is this for reverse, or what is it for. if it is for reverse where can i get a shifter for it and how does it work?
replys can be sent to my email if need be...b_devison@msn.com
tks
Post Count: Starting over
Arm chair racerRoostin Away
The 1983 Big Red did not have reverse. The little shaft you are referring to is the High/Low I think. Is there an H and L on the cases by it?
..Pics?
'85 250SX - My first ever trike and my pride and joy
**Check Out The Whole SX Project Here!!**
'85 350X - 10:1 Piston, performance cam, '86 engline/carb
'85 Powervalved Tri-Z - Fully modded - Soon to have a Corey Sprock 310 kit
'85 250R - Began the modification process. This bike is going to scream! -295cc kit, Ported, Drag intake, 40mil Keihin, VForce reeds, shaved head, PT High Rev pipe, Fat Boy 2 Silencer, +4 Durablue axle, +2 swinger-
Just Too Addicted
Arm chair racerJust too addicted
I have an 83 (chain drive). The red lever is the high/low switch. The 84's and on were shaft driveand had reverse.
Runners:
84 200s
05 rancher
12 rancher
Registered User
New to the board
no, it has the hi/low switch, this is lower on the case , ti looks like a 3/8 splined shaft (rough guess)
Power User
Lord of the trike
That is for the neutral indicator. There should be a little plastic piece on there that points to a "N" when the trike is in neutral.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Registered User
New to the board
nope theres no plastic sohuld there be? ill have to do some looken.
New to the board
Arm chair racerNew to the board
The plastic piece pulls off easily, it's missing on all but one of
my trikes .
C n H
1981 200
1985 200s
1982 185s
1986 110
1986 200x (parts)
Three Wheels Burnin'
Administrator
The day begins with 3WW
The plastic Neutral indicator should have a "c" clip holding it in place. Many of these get taken off when people pull the pull starters off, then get misplaced and or lost and never put back on. I went to my local ATV salvage yard and bought a bunch of these - one for each of my machines that was missing them. they should be available thru service honda - or bikebandit as well for a very minimal price.
In some of my old 3 wheeling magazines, I see they used to make reverse kits for the ATC200E big reds - but I have yet to see one surface since I have been on the boards.
RIP - Yamahondaman!! You will never be forgotten!
RIP - Sam Brehm!! Gone but NEVER forgotten!
RIP - Sandpuppi101 - You will live on in my mind - I miss you friend!
Reply With Quote