Just Too Addicted
Arm chair racerJust too addicted
Is there any optinos for wheels for a ytm 200? I have a three bolt one piece front, and four bolt two-piece rears. Sound like stock type wheels? Why do I have four bolt rears instead of the three bolt? Maybe somebody added them on or did it come stock that way? They take the 22x11x8 tires if that helps, seems like there aren't many options. Maybe I should just leave well enough alone, they work
Power User
Roostin Away
you probably have wheels and hubs from a atc 110 or a 80-82 185s honda .
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Power User
Lord of the trike
You can change out hubs to get a different bolt pattern. The stock YTM 200 (not 200e) runs a 22x11x8 tire on a 8x8 steel rim that has a 3x100 bolt pattern, this is for all 3 wheels. Sometimes it is nice to swap out the hubs for a more comon bolt patter so you can interchange wheels between atv's.
1984 Yamaha YT 60 Tri Zinger(current project)
1983 Yamaha YTM 200 (rear suspension kit)..... long term project
2004 BMW R1150R
1972 Honda CT 70
2007 Lifan 110
Just Too Addicted
Arm chair racerJust too addicted
hmmm, that's weird, wonder where the rear wheels came from? But it does look like the hubs aren't seated comletley on the splines, I'll have to dig a little further on that. Is the four bolt pattern and stronger than the three bolt, or not really? And were the three bolt rears one piece or two?
Just Too Addicted
Arm chair racerJust too addicted
and does anybody have any of the three bolt wheels and hubs laying around?
Power User
Roostin Away
like i said before they are more then likely honda wheels and hubs by what your describing,
your back wheels should be exactly like the front one and you should have 3 lug rear hubs also.
i have a set of the rear hubs i'll sell for $25 shipped
JASON LISKEY
1985 atc 250r ---- finsh line axle,.fmf exhaust and rictor privateer silencer, prm grab bar.
2008 KTM 525xc quad ----- HMF exhaust, HRE chromoly stem,
86 trx 250r --- with after market chromoly frame and everything else done to it
01 400ex --- with 86 trx 250r motor
87 250x + 93 300ex both 350x powered
2 = 86 atc 350x's
86 atc 250r
83 atc 185s --- from retired guy not ridden since 87
Bandito framed 110 with 85 motor and yellow us90 fenders + tank
Power User
Roostin Away
Maybe these hub come from a yamahauler ytm-200E shaft drive. They are 4x126. measure the bolt pattern to be sure.
1984 Yamaha YTM-225DX
1985 Tri-Z 1985 Tecate 1984 Tri-Zinger and 1986 ATC250R projects
Yamaha 3-wheeler owners club Join now!
Official 3WW Yamaha 3-wheeler owners group
Québec 3-wheeler riders group
Just Too Addicted
Arm chair racerJust too addicted
hey jason, pm sent. thanks!
Reply With Quote