Results 1 to 7 of 7

Thread: Spring Family Picture

  1. #1
    breastman569 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2005
    Location
    Tucson & Mesa, Arizona
    --
    272

    Spring Family Picture

    Well ive been working on the 85/86 250R project for a couple of months and its getting ready to make its virgin ride out at the dune in a week or two. if you guys dont remeber i this trike for $300 and it had a dime size hole in the piston cuz the guy didnt know how to run it right on alcohol.

    so i sold off the fairly nice blue plastics and the pipe and carb and made $200 on the bike and i replaced the stuff i sold with the stock stuff i had and used the $200 for a new piston and top end. so all in all its free spare bike and runs quite good.





    1986 250R
    Ported Polished
    Paul Turner Head domed and milled
    Boyesen Rad Valve
    38mm carb
    Uni Air Box eliminator
    Full FMF Exhaust
    85 350X (getting there)
    86 250R (Roller/Parts Bike)
    85 Tri-Z (Parts Bike)
    85 NQ50 Spree (sick ass campus bike)
    Bikes Had
    85 200X (restored)(SOLD!)
    84 Z50R (SOLD!)

  2. #2
    Join Date
    Sep 2004
    Location
    Phoenix, AZ.
    --
    6,719
    Blog Entries
    2
    Nice trio of trikes there.

    Let me know when you're going to the dunes. I'm anxious to see if my R is running better now.

    Edit: if you're looking for one of those dull finish maier front fenders, I have one that I'd trade for a glossy one.
    Last edited by Dammit!; 03-04-2007 at 09:06 PM.

  3. #3
    Join Date
    Jan 2007
    Location
    Back in Happy Valley
    --
    833
    Very nice selection of bikes there, and sounds like an awesome deal on the R even if the motor was junked. I'm not a fan of that pipe that was on it either. Are you planning on installing a front fender? Either was it looks great now, TC...
    86 350X
    85 350X daily rider
    LC 250R
    85 T3
    86 T3 roller
    85 250sx beater



  4. #4
    breastman569 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2005
    Location
    Tucson & Mesa, Arizona
    --
    272
    oh yeah the front fender is on its way here from moshman so it will be complete. and Doug were going the 15th through the 18th.
    1986 250R
    Ported Polished
    Paul Turner Head domed and milled
    Boyesen Rad Valve
    38mm carb
    Uni Air Box eliminator
    Full FMF Exhaust
    85 350X (getting there)
    86 250R (Roller/Parts Bike)
    85 Tri-Z (Parts Bike)
    85 NQ50 Spree (sick ass campus bike)
    Bikes Had
    85 200X (restored)(SOLD!)
    84 Z50R (SOLD!)

  5. #5
    Join Date
    Sep 2004
    Location
    Phoenix, AZ.
    --
    6,719
    Blog Entries
    2
    So you're leaving on a Thursday? Early in the morning or later in the evening?

    This should be my last ride with the stock swinger hopefully. Should have the High Rev on after this one too.

  6. #6
    breastman569 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Feb 2005
    Location
    Tucson & Mesa, Arizona
    --
    272
    probly around noon on thursday is when we would be heading out. ill let you know more when it gets closer.
    1986 250R
    Ported Polished
    Paul Turner Head domed and milled
    Boyesen Rad Valve
    38mm carb
    Uni Air Box eliminator
    Full FMF Exhaust
    85 350X (getting there)
    86 250R (Roller/Parts Bike)
    85 Tri-Z (Parts Bike)
    85 NQ50 Spree (sick ass campus bike)
    Bikes Had
    85 200X (restored)(SOLD!)
    84 Z50R (SOLD!)

  7. #7
    370banshee's Avatar
    370banshee is offline Former 2strokefreak Arm chair racerAt the back of the pack
    Join Date
    Sep 2004
    Location
    N.W. indiana
    --
    259
    sweet hondas...

//ArrowChat Integreation Code //