Man your lucky, When I had a little bit of piston break on my TRX it wedged between the piston and bore and then twisted the crank apart. That sucked and put my bike out for a while. I hope it never happens to my trike.
First Time Rider
Arm chair racerNew to the board
Man your lucky, When I had a little bit of piston break on my TRX it wedged between the piston and bore and then twisted the crank apart. That sucked and put my bike out for a while. I hope it never happens to my trike.
"Out of everything I have ever lost I miss my mind the most"
At The Back Of The Pack
Arm chair racerAt the back of the pack
You and me both brother... My 83 took a dump on me last week and locked up....
1983 250r
1986 200x
1985 250sx
First Time Rider
Arm chair racerNew to the board
well think about it 5000RPM of spinning cast iron vs a piece of cast alu . . . what you think is gonna win
Proud owner of a "cornfed" polaris 500 scrambler. . . 4X4
Coming soon Ninja/mojave/dune buggy, three wheeler
Visit www.tecateconnection.com for tecate info and to find out whats going on in the tecate world!
Power User
The day begins with 3WW
That sucks Alan. Good luck locating your parts.
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Got The Holeshot
Arm chair racerJust too addicted
Ouch man. That sucks I know you will have it going one way or another. I found out what was wrong with mine this weekend too. Bad bowl gasket.
Check my feedback before buying from me
Catch me if you can
WELL thanks to petesATC I got all new parts coming for my 300!!!! WOOT!! you da man!!! so as soon as the stuff arrives I will get this puppy bored to fit, I got a bigger carb for it and a few other goodies to go on it!! I will reserve myself right now from sending it to grande to get reworked till the day nothing is avail for it.
Power User
The day begins with 3WW
NICE, and congrats
Keep us posted! That things really going to scream this time around.
My feedback: http://www.3wheelerworld.com/showthr...k-for-ATC-Eric
Survivor! TF: 07, 08, 09, 10, 11, 12, 13 Sandpuppies: 07, 08, 09, 10, 11, 16, 17, 18 Imperial Invasion 09, 10, 11, 13, 15, 16, 17, 18, 19, 20
Everything Big Bore on FaceBook
Side-hilling son of a gun
Got the holeshot
Yo syko,
Remember our last ride (not Easter) where I was behind you and was seeing sparks coming out of the exhaust, could that have been the missing parts off of the piston skirt????
R.I.P. Hey Ron Racing-GIT IT RAG!
Got the holeshot
i new something was wrong !!! "oh they all sound like that" ..Originally Posted by wheelie king
ALAN!!!!!!!!!!
NOW we know what that was on your spark plug!!!!!!!
"07" DR650 Suzuki Dual Sport
At The Back Of The Pack
Arm chair racerAt the back of the pack
man,mine sounds a lot like alans did.I hope Im not next.I think my cyl is on its last bore.
Power User
Roostin Away
hey no problem,
Need Honda ATC TRX NOS restoration parts??? or come check out our ATC brochure site
www.offroadvintage.com
Power User
Roostin Away
What really sucks is when the skirt lodges between the outer lobes and the bottom of the crankcase. The rotating crank grabs the thin skirt and attempts to roll it through the tight area between the two. When this happens the bottom of crankcase usually ands up cracking or blowing through. I've seen this happen and it's devastating. A lot of people don't realize how thin the metal is in this area, and it has no real strength when pushed out. Yep, you got lucky
Loves Corn.
Catch me if you can
hey syko I dont know who you talked to BUT,, 300 top end was sent out yesterday from service honda..everything.. according to there records every thing in on its way
Check my feedback before buying from me
Catch me if you can
well when you get it make sure you post some pics, you still havnt givin me a number and a name who you talked to.....
Loves Corn.
Catch me if you can
bruce talked to them and called me and told me that everything was sent.. I dont have that info...
Reply With Quote