just bought 1984 cr250r and when kicking it over every so often it skips. so i checked the oil and there were metal flakes in it very very small
not good hey, anybody know what could need fixing. thanks
New to the board
Arm chair racerNew to the board
kickstarter ??
just bought 1984 cr250r and when kicking it over every so often it skips. so i checked the oil and there were metal flakes in it very very small
not good hey, anybody know what could need fixing. thanks
At The Back Of The Pack
Arm chair racerAt the back of the pack
yes u could have stripped *Edited**Edited* kickstarter gear, take the crank case off and take a look.
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
New to the board
Arm chair racerNew to the board
took it off and all the teeth are good but the spindle for the kickstarter has lots of play which gets stuck on the flywheel also there are broken missing peices of the clucth . the clutch still works perfect ?
how much for new clutch plates?
At The Back Of The Pack
Arm chair racerAt the back of the pack
you would have to go to a dealer and price them im not to sure.
1982 yamaha rx50.
2001 murray minibike with 5hp.
fully modded goped.
250cc 4 stroke shifter kart in the process.
Got The Holeshot
Arm chair racerJust too addicted
I know its simple but I have seen it happen before. Make sure the bolt that holds the kicker on and tight is not loose and tight as can be.
My Stable:
2007 ARCTIC CAT DVX400
07 Kawasaki Ninja 650R--My Baby--
Honda 200M with a 200E engine and 200S front end- A true stump pullerSOLD!
Scars are a reminder to the old of all the dumbshit they did while young - Me
Reply With Quote