New to the board
Arm chair racerNew to the board
110/125 frames
Hi guys new here !
I've just picked up a 110 sort of running(smoky) and a 125 with a snapped of steerer tube engine runs ok and it has electric start.
Can I just swap the frame over,or is the smoke just valve seals as the compression seams quite good
New to the board
Arm chair racerNew to the board
Heres my 110 with my mates 70 we used to tow start it
Power User
Roostin Away
I believe 83-85 110-125m frames are the same dimensionally. But there were more things added to the 125m frame like outside routing of the exhaust hangers and a few other small things. Just as with the forks. 125m forks had the brake hub holder where 110 didn't. Dont think it would affect anything using 110 components on a 125m frame. The other way around you would be lacking some attachment points here and there.
Just Too Addicted
Arm chair racerJust too addicted
Another crazy Englander!Be sure to put yourself on the map.
Rob.
ATC 70, ATC 250es, 1/32 ATC 250R
1 person in 10 understands binary, the other one doesn't.
Trikefest UK '08 survivor!
Power User
Teaching quads a lesson
Yeah the 125/110 engines will swap
I'm back in the USSR...
New to the board
Arm chair racerNew to the board
As luck would have it,not 1 but 2 atc 110 frames have appeared on ebay over here so fingers crossed and a reframe could be on the cards
First Time Rider
Arm chair racerNew to the board
If you need a 110 frame i have one in good condition, i'm in wales, pm me for details, i have some other 110 stuff also.
Reply With Quote
