Here is a pic of my 84 and some pics of it with the new carb and 300 motor
As a 250 it ran 5.611 in a 300ft dirt drag. Will find out soon what times it will run with the new motor.
Got The Holeshot
Arm chair racerJust too addicted
Here is a pic of my 84 and some pics of it with the new carb and 300 motor
As a 250 it ran 5.611 in a 300ft dirt drag. Will find out soon what times it will run with the new motor.
Check my feedback before buying from me
Catch me if you can
whats done to it besides the 300kit? what size carb? what kind of pipe?
OH and welcome to the boards!!!
Got The Holeshot
Arm chair racerJust too addicted
I did some minor porting and smoothing to the cylinder and polished the head and I
think the pipe and silencer are cobra it has a reed spacer an fl350 intake, power reeds and a 36mm pwk.
Always finding new and exciting ways to not give a hoot in hell
Catch me if you can
very nice clean R! Welcome to the forums
Got The Holeshot
Arm chair racerJust too addicted
thanks for the welcome I have been meaning to join for a while now.
Just Too Addicted
Arm chair racerJust too addicted
very nice!
1984 250r
heap of 200x
POS motorcraft?
Originally Posted by JAGSFOLIFE
Power User
Teaching quads a lesson
times man, we need new times!!!
Got The Holeshot
Arm chair racerJust too addicted
The first race of the season were i race is may19 so i should find out my times with the new motor then. In the meantime i need to get the jetting dialed in, i will post new times as soon as i get them.
Just Too Addicted
Arm chair racerJust too addicted
Nice trike and welcome to the boards!!
'85 ATC 250R
FMF Fatty & Power Core
Boyesen Rad Valve
38 PWK A/S
K&N w/PF (next purchase)
LSR +4 Axcaliber axle
LSR Duel row bearing carrier
DuraBlue Anti-fade (to be installed)
13/36 sprockets
'85 ATC 250R
Parts trike (maybe future build?)
R.I.P. Hey Ron Racing-GIT IT RAG!
Got the holeshot
thats good times for no wheely bar and no stretch swinger .. NICE "R" !!
"07" DR650 Suzuki Dual Sport
I'm the one with all the 2 stroke around here!
The day begins with 3WW
Welcome to the site.Where are you racing?I would like to find a dragstrip for my big bore Tri-Z.Nice 300 honda Trike.
Here is where my long useless list of stuff nobody cares about should go...
Proudly NOT a member of
"Team on the Teat"
Just Too Addicted
Arm chair racerJust too addicted
That's the best air cooled 250 I've seen so far. Looks fantastic. Xtra points for using / racing it.
Oh, and
TORKER
THOSE WHO SAY IT CANNOT BE DONE, SHOULD NOT GET IN THE WAY OF THOSE BUSY DOING IT...
Got The Holeshot
Arm chair racerJust too addicted
To start off i will answer moshman355's question i race at thunder valley motocross & dirt drags 10130 lynchburg Rd. East Rochester ohio phone.(330)-894-2341 come out and
race sometime i have only seen 1 other trike out there.
The bike can sometimes be a handfull on the starts , tires hook up really good. I will post some videos soon thanks for the compliments and thanks for the welcome everyone.
Last edited by 1upfront; 05-08-2007 at 08:43 PM.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Nice!
Any port timing changes?
Have you had a chance to test and dial in yet?
Got The Holeshot
Arm chair racerJust too addicted
I took the cylinder before i installed it and i smoothed up the ports and sharpened up the transfer ports but did no port timing changes . I went to the drags yesterday and spent most of practice dialing in the bike, i got the jetting right then the flywheel key sheered after i got that figured out i made a few practice passes and it ran great
i was having a hard time keeping the front down . After all of that the rain started and i ended up not racing, the strip got real muddy
Reply With Quote
