Does any one know where I can most likely get an extended swingarm for an 85 t3? Or anyone who makes swingarms can make one extended from two swingarms?
Does any one know where I can most likely get an extended swingarm for an 85 t3? Or anyone who makes swingarms can make one extended from two swingarms?
Go look for a stock 86 T3 aluminum swingarm. They are about a plus 2 inch over stock which is plenty for all around riding.
a good guy on here by the name mnnmaz can do it for you for like 75$ a peice i think. i seen some of his swingarms look real good. Plus he is a certified nasa welder. when i get my extra swing arm im ganna send mine off to him. Pm him and ask about it. but hes ganna need *Edited**Edited* stock swingarm to extend, or maybe he can make you one i dont know.
MY FEEDBACK---
http://www.pbnation.com/showthread.p...2#post20992142
+6 positive feedback.
WaLLa BinG WaLLa BoOm ShE's DoNe!!!
MY 225 Dx
Piped, jetted, 2 stage uni, wheel spacers.
__________________________________
My 82 250R
All original even with tool kit.
Stage 2 uni, no air box jetted.
Or....you could just take yours to a local reputable machine shop or welding shop like I did. I had mine extended 2" and reinforced a little for $100 even. I would have spent more if I had shipped it somewhere.
'84 ATC70.....my 8-y.o. son's ride
moose53 here on the boards does an awesome extension job. nice and clean, ready for paint, plus he will sell yo ua nice extended brake line. you dont see any cobjob weld marks, looks really professional. hey bgm...the 86 swinger will work on the 85? and its longer? hmmm, never thoguth about it, but i might just have to be changing out my swinger here for a bit till i get the 86 up and running.
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
hey if there is no probs im game with that plan.
85 tecate 86lt250r
85atc 200x
It has a little gap with the 86 bushings and the top dogbone mount needs to be remade in the right position on the swingarm.
So how much can you get out of two stock swingarms? I want to try to get the longest swingarm I can get
i believe he can make it any size extension you want, but three is sufficent for the t3 to keep the nose down. unless that is your dragging the bike, then go as long as you want. send him a pm, he'll answer your questions. moose53.
1985 KXT 250 Tecate - kx cylinder, kx ignition, bassani headpipe, answer silencer, v-force reeds, 38mm airstyker carb, +2 franks swinger, raptor rear shock.
1996 YSF240 Blaster - maxxed out!!!
Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "HOLY SH-T, what a ride!"
+3 is overkill for anything that is going to be daily ridden as a trail/play/race bike. A duner may want a + 4 and a drag racer would want about a + 6 if your really making good power.
I dont mind my +12, tho I would like a +10for the next set up haha
Ive talked with mnnmaz and im waiting to hear from moose. Im sure they both do good work just need to get prices and how far I could get the swingarm extended. Thanks