Results 1 to 2 of 2

Thread: Honda 250es rear end and axle

  1. #1
    Join Date
    May 2007
    Location
    Nashville, TN
    --
    12

    Honda 250es rear end and axle

    Hi again I posted yesterday asking for help with my big red with a stripped out rear end. It is a 85, and I have been looking at all the old post and am a little confused.

    I have seen post where people say a 250sx will fit then others saying it will not. Seen post saynig only a 85 will fit, then others saying any 250 will fit. same things about fourtrax rear ends.

    From what i can gather and please correct me if I am wrong but, the rear end from any of these although maybe geared different will fit my bike. The axles are what changes on the SXs and the Fourtrax. And a 85 sx axle will work with my hubs and brakes altough it is 1/4 inch longer.

    What I have not determined is if any other year big red changes somewhere along the way. Can a 86, 87 axle fit my bike using my hubs and brakes? What about other years?


    I have been unable to locate much for the big red so far but plenty for the SX.

    As always thanks a ton in advance, Josh

  2. #2
    Join Date
    Mar 2003
    Location
    Australia
    --
    1,919
    All 85 gear should work through sx and es. However they changed the brake setup in 86 onwards im pretty sure..

    Matt
    1980 ATC 70 Needs Restoration
    1985 ATC 250es Fully Refurbed
    1986 ATC 350x Mint Original

//ArrowChat Integreation Code //